Electrolux owners in Cheyenne usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Cheyenne, with those that mention Electrolux first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Cheyenne
We found 40 appliance repair companies within 60 miles of Cheyenne. 9 list an address in Cheyenne, and the rest are spread across Fort Collins (15), Loveland (8), and Johnstown (3). Distances run up to about 59 miles. Nearest on the list: CD Services, around 0.2 miles out. No company within 90 miles of Cheyenne mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.5 stars across 37 businesses. Because the nearest shops are farther out, ask each company whether Cheyenne is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 7 |
|---|---|
| Mention Electrolux | 0 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Appliance repair companies in range (60 mi) | 40 |
| Open on Saturdays (per listing) | 23 |
| Distance to the three closest (mi) | 0.2, 1.2, 1.5 |
At the top of the Cheyenne list: Romagnoli Appliance Repair (3.1 miles away, 5.0 stars from 105 reviews); Elite Appliance Repair (5.9 miles away, 4.9 stars from 54 reviews, lists Saturday hours); Swede's Appliance Service (1.9 miles away, 5.0 stars from 230 reviews); Manweiler Appliance (45.6 miles away, based in Windsor, 4.9 stars from 649 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Common Electrolux Washer Problems
- Door won't lock / door error. Make sure the door shuts fully with nothing caught in it, listen for the latch click, and check the latch and striker. Source: Electrolux - Front loading washer Error Code E41 door is open
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
What Electrolux Washer Codes Mean
| Code | What it means |
|---|---|
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
- Washer will not spin, or clothes come out soaking wet
How a Washer Service Call Usually Goes in Cheyenne
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Cheyenne, WY
Most washer calls in Cheyenne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing
In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.
Before You Book in Cheyenne
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Cheyenne, WY
Is this Electrolux customer service?
Where is the water under my washer coming from?
How do I get rid of a washer mildew smell?
More Washing Machine Repair in Cheyenne, WY
Electrolux Washer Repair in Nearby Cities
Nearby Towns Served From Cheyenne
The technicians listed for Cheyenne also cover smaller towns nearby, including Ranchettes. If you are in one of them, the companies above are your closest Electrolux washer repair options, and our helpline covers you too.
Write down any error code your Electrolux washer shows and at what point in the cycle it appears. It helps a Cheyenne technician bring the right parts.