If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Silverdale list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Washer Technicians, Silverdale WA
We found 40 appliance repair companies within 30 miles of Silverdale. 5 of them are based in Silverdale itself, and the rest are spread across Seattle (15), Bremerton (9), and Bainbridge Island (7). The farthest listed company is about 17 miles out. No company within 90 miles of Silverdale mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Noble Appliance Expert, around 0.4 miles out. Across 27 rated companies, the average public rating is 4.4 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Companies within 30 miles | 60 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 14 |
| Listing Saturday hours | 49 |
| Mention washer work | 9 |
| Three nearest companies, miles away | 0.4, 1.3, 1.4 |
| Mention Electrolux | 0 |
At the top of the Silverdale list: Sears Appliance Repair (16.4 miles away, based in Shoreline, 4.7 stars from 351 reviews, lists Saturday hours); Super Appliance Repair (14.8 miles away, based in Seattle, 4.9 stars from 150 reviews); Puget Sound Appliance Tech (16.7 miles away, based in Seattle, 4.9 stars from 57 reviews, lists Saturday hours); Appliance Fixers (14.3 miles away, based in Seattle, 5.0 stars from 68 reviews, lists Saturday hours).
Know Your Electrolux Washer
What a Electrolux Washer Technician Deals With
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Water level is monitored by a pressure sensor, which raises E35 when it reads an overfill condition. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill
Electrolux Washer Symptoms and First Checks
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
Signs Your Electrolux Washer Needs a Technician
- Water on the floor under or in front of the washer
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What a Washing Machine Technician Checks
Owner Care for Electrolux Washers
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Silverdale, WA
Most washer calls in Silverdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Silverdale
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Silverdale, WA
Why does my Electrolux washer show an error code?
Is my Electrolux washer worth repairing?
How do I get rid of a washer mildew smell?
How do I find a technician who knows Electrolux washers?
More Washing Machine Repair in Silverdale, WA
Electrolux Washer Repair in Nearby Cities
Also Serving Towns Around Silverdale
Live outside Silverdale? The same Electrolux washer repair technicians serve Tracyton. See each town's own washing machine repair listings below.
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.