If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Washing Machine Repair Near Me is independent and not affiliated with Electrolux. Listed companies are independent technicians who repair Electrolux washers and other brands.
Who Works on Electrolux Washers Near Draper
Our data shows 40 appliance repair companies inside a 30-mile radius of Draper. 5 of them are based in Draper itself, and other nearby bases include Sandy (14), Riverton (6), and Lehi (5). No company within 90 miles of Draper mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. SterlingCare Appliance Repair Draper is the nearest, roughly 1.5 miles from Draper. Rated companies nearby average 4.9 stars across 20 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Electrolux | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 9 |
| Listing Saturday hours | 40 |
| Appliance repair companies in range (30 mi) | 60 |
| Name washers or washing machines in their listing | 7 |
| Three nearest companies, miles away | 1.5, 1.5, 1.9 |
Closest matches for Draper: Famous Appliance Service (7.6 miles away, based in Midvale, 4.6 stars from 805 reviews); Appliance Man (6.5 miles away, based in Sandy, 4.7 stars from 424 reviews, lists Saturday hours); Trusty Appliance Repair (7.4 miles away, based in Sandy, 4.9 stars from 313 reviews, lists Saturday hours); Sears Appliance Repair (6.1 miles away, based in Sandy, 4.3 stars from 134 reviews, lists Saturday hours).
Know which Electrolux washer you have before you call. Electrolux makes front-load models, and the technician will ask.
Know Your Electrolux Washer
How Electrolux Washers Are Built
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Washer not filling. Leave the unit powered through the temporary lockout, then check that hot and cold lines are not swapped and the water supply meets the guide's requirements. Source: Electrolux - Front loading washer Error Code E11 long fill time
- Washer not draining. Straighten any kinked drain hose first, then confirm the hot and cold supply lines are not reversed and the drain hose is installed per the manual. Source: Electrolux - Front loading washer Error Code E21 long pump out time
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
Electrolux Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Water on the floor under or in front of the washer
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Draper Washer Call
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Electrolux Washer Repair Cost Ranges
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Draper, UT
Most washer calls in Draper come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Before You Book in Draper
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
Electrolux Washer Repair FAQs: Draper, UT
How do I find a technician who knows Electrolux washers?
Why won't my washer spin?
Why does my front-load washer smell?
What should I do about a Electrolux error code?
Other Washer Repair in Draper
Electrolux Washer Repair Near Draper
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.