If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Wayne MI
Our data shows 40 appliance repair companies inside a 30-mile radius of Wayne. 2 list an address in Wayne, and other nearby bases include Livonia (11), Detroit (6), and Romulus (3). Distances run up to about 13 miles. The closest is Wayne Appliance Repair Solutions, about 0.1 miles away. None of the repair companies near Wayne name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 38 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Wayne. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Name washers or washing machines in their listing | 10 |
|---|---|
| Mention Electrolux | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Three nearest companies, miles away | 0.1, 0.4, 2.6 |
| Open on Saturdays (per listing) | 37 |
| With 4.5+ stars and at least 10 reviews | 16 |
First up for Wayne: Mr. Appliance of Oakland County (7.4 miles away, based in Livonia, 4.8 stars from 1,216 reviews, lists Saturday hours); Sears Appliance Repair (10.8 miles away, based in Livonia, 4.6 stars from 258 reviews, lists Saturday hours); Sears Appliance Repair (7.0 miles away, based in Livonia, 4.6 stars from 149 reviews, lists Saturday hours); Sears Appliance Repair (10.0 miles away, based in Lincoln Park, 4.6 stars from 271 reviews, lists Saturday hours).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Electrolux Washer
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
What Electrolux Says to Check First
- Washer leaking. Start by pinning down exactly where the water is coming from, since that decides the next step. Source: Electrolux - Front loading washer is leaking water
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| HO SE | The hot and cold inlet hoses are connected to the wrong inlets. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection |
| E11 | Long fill time; the washer is not filling during the wash phase. Source: Electrolux - Front loading washer Error Code E11 long fill time |
| E21 | Long pump-out time; water is not leaving the tub fast enough. Source: Electrolux - Front loading washer Error Code E21 long pump out time |
Electrolux Washer Problems Worth a Service Call
- An error code on the display
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Wayne Washer Call
Care Electrolux Recommends for Its Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Price the repair before replacing a Electrolux washer. Published ranges for common jobs:
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Wayne, MI
Most washer calls in Wayne come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Wayne Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Electrolux Washer Repair FAQs: Wayne, MI
How do I get rid of a washer mildew smell?
Is my Electrolux washer worth repairing?
Do you work for Electrolux?
Which Wayne technicians work on Electrolux?
More Washing Machine Repair in Wayne, MI
Electrolux Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.