If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Erie list starts with companies that name Electrolux, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Electrolux, and the technicians listed are independent repair companies, not the manufacturer.
Independent Electrolux Washer Technicians, Erie CO
Our data shows 40 appliance repair companies inside a 30-mile radius of Erie. 1 list an address in Erie, and other nearby bases include Thornton (10), Longmont (7), and Broomfield (6). Distances run up to about 11 miles. No company within 90 miles of Erie mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Columbine Appliance & Fireplaces, around 1.0 miles out. The 33 rated companies in range average 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| With 4.5+ stars and at least 10 reviews | 12 |
|---|---|
| Three nearest companies, miles away | 1.0, 4.0, 4.2 |
| Mention Electrolux | 0 |
| Name washers or washing machines in their listing | 14 |
| Repair companies inside 30 miles | 60 |
| Open on Saturdays (per listing) | 41 |
The leading options for Erie are Columbine Appliance & Fireplaces (1.0 miles away, 4.8 stars from 2,693 reviews, lists Saturday hours); Mr. Appliance of Boulder (9.0 miles away, based in Boulder, 4.8 stars from 598 reviews, lists Saturday hours); Elevation Appliance and Fireplace (4.2 miles away, based in Frederick, 5.0 stars from 167 reviews); Viking Repair Pro (9.1 miles away, based in Longmont, 4.7 stars from 13 reviews, lists Saturday hours).
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
The washer can detect hot and cold inlet hoses connected backward and shows HO SE until they are swapped; reversed lines are also listed as a cause of long-fill and long-drain codes. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection
Common Electrolux Washer Problems
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
When to Call for Electrolux Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Musty or mildew smell from the drum or door seal
- Water on the floor under or in front of the washer
What Gets Fixed on a Erie Washer Call
Owner Care for Electrolux Washers
- Keep the washer level on a solid floor, tighten the leveling-leg lock nuts, and keep legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide
- Use high-efficiency (HE) detergent, keep each dispenser compartment below its max fill line, and put detergent packs in the drum rather than the dispenser. Source: Electrolux - Laundry Washers Detergent Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
What Erie Owners Should Know
Most washer calls in Erie come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
Before You Book in Erie
- Will you check the drain pump filter and drain hose before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
- How often do you repair Electrolux washers, and how quickly can you get parts?
Electrolux Washer Repair FAQs: Erie, CO
How do I get rid of a washer mildew smell?
Why is my washer leaking?
What stops a washer from spinning?
Should I repair or replace my Electrolux washer?
Related Repair Pages for Erie
More Electrolux Washer Repair Pages Nearby
Before you call, find the model and serial number on your Electrolux washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.