If your Amana washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Dunn list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Dunn NC
Within 30 miles of Dunn there are 36 appliance repair companies in our data. 2 of them are based in Dunn itself, and other nearby bases include Fayetteville (13), Fuquay-Varina (4), and Smithfield (2). The farthest listed company is about 30 miles out. None of the repair companies near Dunn name Amana in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. The closest is Archie's Appliance, about 0.2 miles away. Across 35 rated companies, the average public rating is 4.2 stars.
Companies are shown by relevance and distance from Dunn. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 24 |
|---|---|
| Mention Amana | 0 |
| Companies within 30 miles | 36 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Distance to the three closest (mi) | 0.2, 0.4, 6.1 |
| Name washers or washing machines in their listing | 7 |
Closest matches for Dunn: Sears Appliance Repair (0.4 miles away, 4.6 stars from 128 reviews, lists Saturday hours); One Source Appliance Repair (23.4 miles away, based in Holly Springs, 4.7 stars from 239 reviews); Sears Appliance Repair (25.7 miles away, based in Fayetteville, 4.5 stars from 589 reviews, lists Saturday hours); Mr. Appliance of Sanford (26.0 miles away, based in Broadway, 4.6 stars from 142 reviews, lists Saturday hours).
Amana sells top-load agitator washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Amana Washer Lines Technicians Work On
How Amana Washers Are Built
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
What Amana Says to Check First
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer not filling. Amana says to start at the faucets and make sure both hot and cold are on, then check the inlet hoses for kinks and the inlet screens for clogs. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| drn | Top load: the washer isn't draining properly, sometimes because of how it was installed. Source: Amana - Error Codes in Top Load HE Washers |
| LOC / LC | Front load: control lock is on. Source: Amana - Error Codes in Front Load Washers |
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
Amana Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
Inside a Washer Repair Visit
Owner Care for Amana Washers
- Run the Clean Washer cycle with a washer cleaning tablet about once a month to clear detergent and softener residue. Source: Amana - HE Detergent use in a Washer
- With the water supply turned off, check the inlet screens on the water valve and brush them clean with mild soapy water, leaving the screens in place. Source: Amana - Checking the Fill Hoses if the Washer is not Filling
What Amana Washer Repairs Cost
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- How old the washer is
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Any error code shown on the display
Laundry Notes for Dunn, NC
Most washer calls in Dunn come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Dunn
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
- Do you work on front-load and top-load washers, or only one type?
Amana Washer Repair FAQs: Dunn, NC
What should I do about a Amana error code?
Do you work for Amana?
Why won't my washer spin?
More Washing Machine Repair in Dunn, NC
More Amana Washer Repair Pages Nearby
Also Serving Towns Around Dunn
The technicians listed for Dunn also cover smaller towns nearby, including Erwin and Clinton. If you are in one of them, the companies above are your closest Amana washer repair options, and our helpline covers you too.
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.