Most Amana washer repairs in Spring Lake involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Spring Lake list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Amana, and the technicians listed are independent repair companies, not the manufacturer.
Independent Amana Washer Technicians, Spring Lake NC
We found 32 appliance repair companies within 30 miles of Spring Lake. 1 of them are based in Spring Lake itself, and the rest are spread across Fayetteville (14), Sanford (5), and Fuquay-Varina (3). Distances run up to about 30 miles. Nearest on the list: MJH APPLIANCE SALES & SERVICES, around 2.0 miles out. No company within 90 miles of Spring Lake mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 31 rated companies in range average 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name washers or washing machines in their listing | 8 |
|---|---|
| Repair companies inside 30 miles | 32 |
| Distance to the three closest (mi) | 2.0, 5.9, 6.0 |
| Mention Amana | 0 |
| Listing Saturday hours | 17 |
| Rated 4.5 stars or higher (10+ reviews) | 16 |
At the top of the Spring Lake list: Sears Appliance Repair (8.0 miles away, based in Fayetteville, 4.5 stars from 589 reviews, lists Saturday hours); Sears Appliance Repair (20.8 miles away, based in Sanford, 4.6 stars from 248 reviews, lists Saturday hours); Appliance Repair Fayetteville NC (13.4 miles away, based in Fayetteville, 4.4 stars from 14 reviews); One Source Appliance Repair (26.7 miles away, based in Holly Springs, 4.7 stars from 239 reviews).
Know which Amana washer you have before you call. Amana makes top-load agitator models, and the technician will ask.
Amana Washer Lines and Features
What a Amana Washer Technician Deals With
Amana gives a drainpipe height range of 30 inches minimum to 96 inches maximum, and above the maximum, water can flow back into the washer. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
The Amana Dual Action Agitator top loader is belt-driven by a 1/4 HP motor. Source: Whirlpool Corporation - Amana 3.5 cu. ft. Top-Load Washer with Dual Action Agitator (NTW4516FW)
What Amana Says to Check First
- Washer shaking or walking. Amana says to spread the load evenly, make sure the shipping bolts were removed, and adjust the feet until all four touch the floor and the washer doesn't rock. Source: Amana - Washer is Vibrating, Walking or Moving
- Washer odor. For front loaders, Amana says to clean and dry the door seal, take wet clothes out promptly, avoid overloading, and leave the door open between loads. Source: Amana - Cleaning a Front Load Washer Door Seal
Reading a Amana Washer Error Code
| Code | What it means |
|---|---|
| LdL | Top load: the lid can't lock, often because of an item under the lid or detergent buildup at the lock. Source: Amana - Error Codes in Top Load HE Washers |
| HC | Top load: the hot and cold inlet hoses are connected backward. Source: Amana - Error Codes in Top Load HE Washers |
| LdU | Top load: the lid can't unlock because something is sitting on top of the washer. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
Inside a Washer Repair Visit
Owner Care for Amana Washers
- On front loaders, wipe the door seal clean and dry its folds, take wet clothes out promptly, and leave the door open between uses. Source: Amana - Cleaning a Front Load Washer Door Seal
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
Budgeting for a Amana Washer Repair
Price the repair before replacing a Amana washer. Published ranges for common jobs:
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Around Spring Lake
Most washer calls in Spring Lake come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Hiring a Washer Repair Company in Spring Lake
- How often do you repair Amana washers, and how quickly can you get parts?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Spring Lake, NC
Should I repair or replace my Amana washer?
Why won't my washer spin?
Where is the water under my washer coming from?
More Washing Machine Repair in Spring Lake, NC
Amana Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Amana washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.