A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Allouez list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Allouez
Within 30 miles of Allouez there are 25 appliance repair companies in our data. The rest are spread across Green Bay (11), Appleton (7), and De Pere (3). Distances run up to about 27 miles. The closest is Barton Appliance Repair Experts, about 0.9 miles away. No company within 90 miles of Allouez mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 23 rated companies, the average public rating is 4.5 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Whirlpool | 0 |
|---|---|
| Three nearest companies, miles away | 0.9, 2.3, 2.4 |
| Companies within 30 miles | 25 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Name washers or washing machines in their listing | 5 |
| Listing Saturday hours | 10 |
Closest matches for Allouez: Mr. Appliance of Green Bay (2.9 miles away, based in De Pere, 4.8 stars from 428 reviews, lists Saturday hours); Mr. Appliance of Appleton (14.4 miles away, based in Kaukauna, 4.9 stars from 56 reviews, lists Saturday hours); Sears Appliance Repair (3.9 miles away, based in Green Bay, 3.9 stars from 38 reviews, lists Saturday hours); Sears Appliance Repair (26.5 miles away, based in Appleton, 4.2 stars from 70 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Says to Check First
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer fills slowly, will not fill, or keeps filling
- An error code on the display
- Water left in the drum after the cycle
How a Washer Service Call Usually Goes in Allouez
Care Whirlpool Recommends for Its Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Any error code shown on the display
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Local Notes for Allouez
Most washer calls in Allouez come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin
In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.
Hiring a Washer Repair Company in Allouez
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Allouez, WI
Why does my Whirlpool washer show an error code?
Which Allouez technicians work on Whirlpool?
Is this Whirlpool customer service?
Related Repair Pages for Allouez
More Whirlpool Washer Repair Pages Nearby
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Allouez technician bring the right parts.