If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Sammamish list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Who Works on Whirlpool Washers Near Sammamish
40 repair companies serve Sammamish from within 30 miles. 3 list an address in Sammamish, and other nearby bases include Bellevue (16), Redmond (14), and Issaquah (6). Sammamish Appliance Repair is the nearest, roughly 0.6 miles from Sammamish. None of the companies within 30 miles mention Whirlpool by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.8 stars across 33 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Whirlpool | 0 |
|---|---|
| Mention washer work | 15 |
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Distance to the three closest (mi) | 0.6, 0.9, 1.3 |
| Listing Saturday hours | 38 |
Closest matches for Sammamish: Whirlpool Corporation (39.3 miles away, based in Spanaway, 2.3 stars from 47 reviews); Super Appliance Repair (4.5 miles away, based in Bellevue, 5.0 stars from 116 reviews); Troubleshooters Appliance Repair (6.9 miles away, based in Newcastle, 4.9 stars from 136 reviews, lists Saturday hours); Eastside Appliance Repair (3.7 miles away, based in Bellevue, 4.9 stars from 234 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
What Whirlpool Says to Check First
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer smells. Run the Clean Washer cycle monthly, use only HE detergent, take clothes out promptly, and leave the door open between loads. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
How a Washer Service Call Usually Goes in Sammamish
Keeping a Whirlpool Washer Running
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
Local Notes for Sammamish
Most washer calls in Sammamish come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Before You Book in Sammamish
- What guarantee do you give on parts and labor?
- Will you check the drain pump filter and drain hose before replacing the pump?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Sammamish, WA
Is my Whirlpool washer worth repairing?
Why is my washer leaking?
Do you work for Whirlpool?
What should I do about a Whirlpool error code?
More Washing Machine Repair in Sammamish, WA
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.