Most Whirlpool washer repairs in Kaysville involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Kaysville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Kaysville
40 repair companies serve Kaysville from within 30 miles. 2 of them are based in Kaysville itself, and the rest are spread across Salt Lake City (15), Clearfield (3), and Ogden (3). The farthest listed company is about 21 miles out. Aaron’s Appliance Repair is the nearest, roughly 0.9 miles from Kaysville. No company within 90 miles of Kaysville mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 28 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Kaysville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.9, 1.4, 2.0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 18 |
| Name washers or washing machines in their listing | 4 |
| Mention Whirlpool | 0 |
| Appliance repair companies in range (30 mi) | 60 |
| Listing Saturday hours | 41 |
The leading options for Kaysville are Famous Appliance Service (11.9 miles away, based in North Salt Lake, 4.7 stars from 510 reviews); Sears Home Services Appliance Repair (20.1 miles away, based in Salt Lake City, 3.8 stars from 66 reviews, lists Saturday hours); iFiX, LLC (10.3 miles away, based in Riverdale, 4.9 stars from 436 reviews); Dick Kearsley Service Center (6.6 miles away, based in Clearfield, 4.6 stars from 609 reviews, lists Saturday hours).
Whirlpool Washer Lines Technicians Work On
How Whirlpool Washers Are Built
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not spin, or clothes come out soaking wet
- Loud banging, shaking or walking during the spin
- Washer fills slowly, will not fill, or keeps filling
What Gets Fixed on a Kaysville Washer Call
Keeping a Whirlpool Washer Running
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Kaysville, UT
Most washer calls in Kaysville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a Kaysville Washer Technician
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- Is your company licensed where my state requires it, and insured?
- Will you check the drain pump filter and drain hose before replacing the pump?
Whirlpool Washer Repair FAQs: Kaysville, UT
Why does my front-load washer smell?
What stops a washer from spinning?
Is my Whirlpool washer worth repairing?
Why is my washer leaking?
More Washing Machine Repair in Kaysville, UT
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.