Whirlpool owners in Gatesville usually want two things from a repair company: experience with the brand and quick access to parts. The Gatesville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Washer Technicians, Gatesville TX
19 repair companies serve Gatesville from within 30 miles. 1 list an address in Gatesville, and the rest are spread across Killeen (8), Temple (3), and Harker Heights (2). The farthest listed company is about 29 miles out. 1 lists Whirlpool specifically. Sears Appliance Repair is the nearest, roughly 1.0 miles from Gatesville. The 17 rated companies in range average 4.2 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 1.0, 19.3, 21.6 |
|---|---|
| Name washers or washing machines in their listing | 8 |
| Open on Saturdays (per listing) | 10 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Mention Whirlpool | 1 |
| Repair companies inside 30 miles | 19 |
Closest matches for Gatesville: Sears Appliance Repair (1.0 miles away, 4.5 stars from 96 reviews, lists Saturday hours); Mr. Appliance of Waco (28.2 miles away, based in Woodway, 4.6 stars from 365 reviews); Sears Appliance Repair (24.2 miles away, based in Killeen, 4.2 stars from 321 reviews, lists Saturday hours); Searle’s Washer & Dryer Repair (28.5 miles away, based in Temple, 4.9 stars from 157 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What a Whirlpool Washer Technician Deals With
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer will not spin, or clothes come out soaking wet
- Washer will not start or the lid or door stays locked
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Local Notes for Gatesville
Most washer calls in Gatesville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, §1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Questions to Ask a Gatesville Washer Technician
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
Whirlpool Washer Repair FAQs: Gatesville, TX
Why won't my washer spin?
Do you work for Whirlpool?
Why does my Whirlpool washer show an error code?
Where is the water under my washer coming from?
Related Repair Pages for Gatesville
Whirlpool Washer Repair Near Gatesville
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Gatesville technician bring the right parts.