A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Garland list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Garland TX
Our data shows 40 appliance repair companies inside a 30-mile radius of Garland. 15 of them are based in Garland itself, and other nearby bases include Dallas (7), Mesquite (5), and Plano (5). 1 lists Whirlpool specifically. The closest is North Dallas Vent Hoods, about 0.3 miles away. Across 32 rated companies, the average public rating is 4.6 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Distance to the three closest (mi) | 0.3, 0.4, 1.3 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 28 |
| Name washers or washing machines in their listing | 19 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention Whirlpool | 1 |
| Open on Saturdays (per listing) | 45 |
Closest matches for Garland: Fast Whirlpool Appliance Repair (3.1 miles away, 4.3 stars from 35 reviews, lists Saturday hours); Galo Appliance Repair (3.9 miles away, 4.9 stars from 507 reviews, lists Saturday hours); Appliance Fix Experts (1.9 miles away, 4.8 stars from 63 reviews, lists Saturday hours); RPS Appliance Repair (3.2 miles away, 4.9 stars from 535 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
What a Whirlpool Washer Technician Deals With
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Says to Check First
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- Washer will not start or the lid or door stays locked
What Gets Fixed on a Garland Washer Call
Keeping a Whirlpool Washer Running
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Around Garland
Most washer calls in Garland come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Washer Repair Company in Garland
- Will you check the drain pump filter and drain hose before replacing the pump?
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Garland, TX
Which Garland technicians work on Whirlpool?
How do I get rid of a washer mildew smell?
Where is the water under my washer coming from?
Other Washer Repair in Garland
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.