A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Whirlpool Washer Repair Near St. Clairsville
Our data shows 40 appliance repair companies inside a 60-mile radius of St. Clairsville. The rest are spread across Pittsburgh (12), Coraopolis (3), and Washington (2). The farthest listed company is about 53 miles out. 1 lists Whirlpool specifically. The closest is Platinum Factory Service, about 9.3 miles away. Across 30 rated companies, the average public rating is 4.3 stars. St. Clairsville is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 38 |
|---|---|
| Mention Whirlpool | 1 |
| Three nearest companies, miles away | 9.3, 9.6, 13.7 |
| Name washers or washing machines in their listing | 8 |
| With 4.5+ stars and at least 10 reviews | 19 |
| Companies within 60 miles | 60 |
Closest matches for St. Clairsville: PowerFix Appliance Repair (49.3 miles away, based in Pittsburgh, 5.0 stars from 215 reviews, lists Saturday hours); Mr. Appliance of Northern Pittsburgh, Moon and South Hills (47.9 miles away, based in Moon Township, 4.5 stars from 418 reviews, lists Saturday hours); Sears Appliance Repair (53.1 miles away, based in Coshocton, 4.5 stars from 28 reviews, lists Saturday hours); Platinum Factory Service (9.3 miles away, based in Bellaire, 3.3 stars from 968 reviews).
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Whirlpool Washer Symptoms and First Checks
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Burning smell or a motor that hums without turning
- Water on the floor under or in front of the washer
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Owner Care for Whirlpool Washers
- Run the Clean Washer cycle once a month with affresh cleaner or regular liquid chlorine bleach to keep the washer fresh. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Where the washer drains (standpipe or laundry sink)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around St. Clairsville
Most washer calls in St. Clairsville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Ohio has no state license for appliance repair; the Ohio Construction Industry Licensing Board licenses commercial contractors in plumbing, hydronics, refrigeration, HVAC and electrical, and residential contractor work is generally overseen locally. Source: Ohio Department of Commerce: OCILB Contractor Complaint Form
In Ohio, you can check a license with the Ohio Department of Commerce OCILB Company Licensee Lookup or report a problem to the Ohio Attorney General, Consumer Protection Section.
Hiring a Washer Repair Company in St. Clairsville
- Can you give a written estimate before ordering parts?
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
Whirlpool Washer Repair FAQs: St. Clairsville, OH
How do I find a technician who knows Whirlpool washers?
What should I do about a Whirlpool error code?
Why does my front-load washer smell?
Other Washer Repair in St. Clairsville
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.