A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Kenilworth, with those that mention Whirlpool first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Kenilworth
Within 30 miles of Kenilworth there are 40 appliance repair companies in our data. The rest are spread across Elizabeth (7), Union (4), and Linden (4). Distances run up to about 7 miles. No company within 90 miles of Kenilworth mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Riverton Winfield Appliance Service, about 1.4 miles away. Rated companies nearby average 4.6 stars across 32 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention washer work | 16 |
|---|---|
| Three nearest companies, miles away | 1.4, 1.5, 1.9 |
| Open on Saturdays (per listing) | 51 |
| Repair companies inside 30 miles | 60 |
| Mention Whirlpool | 0 |
| With 4.5+ stars and at least 10 reviews | 16 |
At the top of the Kenilworth list: Sears Appliance Repair (6.7 miles away, based in Watchung, 4.5 stars from 254 reviews, lists Saturday hours); Union Appliance Repair Service (2.3 miles away, based in Union, 4.7 stars from 6 reviews, lists Saturday hours); Top Tech Appliance Repair LLC (7.3 miles away, based in Carteret, 5.0 stars from 125 reviews, lists Saturday hours); Elizabeth Appliance Repair Pros (3.2 miles away, based in Elizabeth, 4.1 stars from 8 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
How Whirlpool Washers Are Built
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Washer will not start or the lid or door stays locked
- Loud banging, shaking or walking during the spin
- Water left in the drum after the cycle
What a Washing Machine Technician Checks
Care Whirlpool Recommends for Its Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Agitator replacement: $350–$575 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Kenilworth Owners Should Know
Most washer calls in Kenilworth come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
New Jersey has no license specific to appliance repair; plumbing work is reserved to state-licensed master plumbers, and gas piping work on the customer side of the meter falls under HVACR contractor licensing, both overseen by boards in the Division of Consumer Affairs. Source: NJ Division of Consumer Affairs: State Board of Examiners of Master Plumbers rule notice
In New Jersey, you can check a license with the New Jersey Division of Consumer Affairs License Verification System or report a problem to the New Jersey Division of Consumer Affairs.
Hiring a Washer Repair Company in Kenilworth
- How often do you repair Whirlpool washers, and how quickly can you get parts?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Kenilworth, NJ
What stops a washer from spinning?
Do you work for Whirlpool?
Which Kenilworth technicians work on Whirlpool?
Related Repair Pages for Kenilworth
More Whirlpool Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.