Serving Matthews, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Whirlpool Washer Repair in Matthews, NC

See which technicians around Matthews, NC mention Whirlpool, how far away they are and how customers rate them.

Talk to a Whirlpool washer tech in Matthews
One call reaches an independent technician near Matthews who works on Whirlpool.
☎(866) 293-4411
✓10 companies listed for Matthews✓Independent, not a manufacturer✓Public ratings & distances

A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.

Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.

Whirlpool Washer Repair Near Matthews

40 repair companies serve Matthews from within 30 miles. 12 list an address in Matthews, and other nearby bases include Charlotte (15), Indian Trail (6), and Monroe (4). Distances run up to about 10 miles. Wolf Elite Home Solutions is the nearest, roughly 0.5 miles from Matthews. No company within 90 miles of Matthews mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.9 stars across 37 businesses.

Washer & Dryer Repair
Smartfix Appliance & Refrigerator Repair
7004 Sedgewick Rd, Indian Trail, NC 28079
6.5 mi from Matthews
★★★★★ 4.9 (438 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ProLine Appliance repair
12124 Bobhouse Dr, Charlotte, NC 28277
7.5 mi from Matthews
★★★★★ 5.0 (142 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AlphaGood Appliance Repair
5619 Wyalong Dr, Charlotte, NC 28227
3.7 mi from Matthews
★★★★★ 5.0 (115 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Just Call Appliance Repair
10643 Kettering Dr Unit 202, Charlotte, NC 28226
8.8 mi from Matthews
★★★★★ 5.0 (115 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Urgent Appliance Repair
814 Circle Trace Rd, Monroe, NC 28110
8.7 mi from Matthews
★★★★★ 5.0 (159 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
CLT Appliance Repair, LLC
933 Louise Ave #506, Charlotte, NC 28204
9.6 mi from Matthews
★★★★★ 4.9 (682 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A One Appliance Repair & Plumbing Services
6135 Park S Dr #500, Charlotte, NC 28210
7.8 mi from Matthews
★★★★★ 5.0 (83 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Almaks Appliance Repair in Charlotte
10833 Monroe Rd Suit P031, Matthews, NC 28105
1.2 mi from Matthews
★★★★★ 4.9 (67 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
11033 Carolina Pl Pkwy, Pineville, NC 28134
9.7 mi from Matthews
★★★★½ 4.6 (148 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
CLT Appliance Repair
11334 Foxhaven Dr, Charlotte, NC 28277
7.6 mi from Matthews
★★★★★ 4.9 (532 reviews)
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Matthews repair companies in numbers
Open on Saturdays (per listing)48
Mention Whirlpool0
Distance to the three closest (mi)0.5, 0.6, 0.6
Rated 4.5 stars or higher (10+ reviews)36
Mention washer work23
Companies within 30 miles60

At the top of the Matthews list: Smartfix Appliance & Refrigerator Repair (6.5 miles away, based in Indian Trail, 4.9 stars from 438 reviews, lists Saturday hours); ProLine Appliance repair (7.5 miles away, based in Charlotte, 5.0 stars from 142 reviews, lists Saturday hours); AlphaGood Appliance Repair (3.7 miles away, based in Charlotte, 5.0 stars from 115 reviews, lists Saturday hours); Just Call Appliance Repair (8.8 miles away, based in Charlotte, 5.0 stars from 115 reviews, lists Saturday hours).

⚡ Get connected with a Whirlpool washer technician near Matthews
☎(866) 293-4411

Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Whirlpool Washer Lines Technicians Work On

Pretreat StationA built-in faucet and scrub area on the washer for soaking and scrubbing stains before the wash.
2 in 1 Removable AgitatorA top load design with an agitator that lifts out over a permanent impeller, so each load can be washed either way.

What a Whirlpool Washer Technician Deals With

Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer

What Whirlpool Says to Check First

What Whirlpool Washer Codes Mean

CodeWhat it means
F8 E1 / Lo FLLow water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers
F9 E1Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers
Sud / SdToo many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers

When to Call for Whirlpool Washer Repair

  • Water left in the drum after the cycle
  • Burning smell or a motor that hums without turning
  • Water on the floor under or in front of the washer

What a Washing Machine Technician Checks

Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Owner Care for Whirlpool Washers

Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.

Budgeting for a Whirlpool Washer Repair

A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Before the Technician Arrives

  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
  • How old the washer is
  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet

Around Matthews

Most washer calls in Matthews come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Questions to Ask a Matthews Washer Technician

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • How often do you repair Whirlpool washers, and how quickly can you get parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Whirlpool Washer Repair FAQs: Matthews, NC

Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
How do I find a technician who knows Whirlpool washers?
Companies whose listings or websites mention Whirlpool are flagged on this page. Most washer technicians work on several brands, so ask how often they service your model line and whether they can get Whirlpool parts quickly.
What should I do about a Whirlpool error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged drain filter, a kinked hose or an unbalanced load. If the code returns, a technician can test the part the code points to.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Related Repair Pages for Matthews

Whirlpool Washer Repair Near Matthews

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.

Call to reach an independent Whirlpool washer tech
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech