Serving Matthews, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Commercial Washer Repair in Matthews, NC

A local list of companies near Matthews that work on commercial laundry equipment, with distances and public ratings.

Coin-op washer out of service in Matthews?
Call our helpline to be connected with a technician who works on commercial washers.
☎(866) 293-4411
✓10 companies listed for Matthews✓Independent, not a manufacturer✓Public ratings & distances

Commercial washers run many more cycles than a home machine and add coin or card systems, heavier drives and, on larger machines, bolted-down frames that home models do not have. The Matthews list below starts with companies that mention commercial, laundromat or multifamily laundry work within a longer drive, followed by the nearest appliance repair companies.

Laundromat & Coin-Op Washer Technicians, Matthews NC

We found 40 appliance repair companies within 30 miles of Matthews. 12 of them are based in Matthews itself, and the rest are spread across Charlotte (15), Indian Trail (6), and Monroe (4). Distances run up to about 10 miles. No company within 30 miles of Matthews names commercial, laundromat or coin-op laundry work in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: Wolf Elite Home Solutions, around 0.5 miles out. The 37 rated companies in range average 4.9 stars.

Commercial Laundry Work
K1 Pro Services
707 Dallas Spencer Mountain Rd, Dallas, NC 28034
27.9 mi from Matthews
★★★★★ 5.0 (433 reviews)
Saturday hours
Washer & Dryer Repair
Smartfix Appliance & Refrigerator Repair
7004 Sedgewick Rd, Indian Trail, NC 28079
6.5 mi from Matthews
★★★★★ 4.9 (438 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A One Appliance Repair & Plumbing Services
6135 Park S Dr #500, Charlotte, NC 28210
7.8 mi from Matthews
★★★★★ 5.0 (83 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
CLT Appliance Repair, LLC
933 Louise Ave #506, Charlotte, NC 28204
9.6 mi from Matthews
★★★★★ 4.9 (682 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Urgent Appliance Repair
814 Circle Trace Rd, Monroe, NC 28110
8.7 mi from Matthews
★★★★★ 5.0 (159 reviews)
Mentions washersSaturday hours
Appliance Repair
Expert Appliance Service LLC
10931 E Independence Blvd Ste D7, Matthews, NC 28105
0.6 mi from Matthews
★★★★★ 5.0 (321 reviews)
Saturday hours
Washer & Dryer Repair
ProLine Appliance repair
12124 Bobhouse Dr, Charlotte, NC 28277
7.5 mi from Matthews
★★★★★ 5.0 (142 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Prime Appliance Repair
4301 Emerald Ln, Indian Trail, NC 28079
5.2 mi from Matthews
★★★★★ 5.0 (70 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
CLT Appliance Repair
11334 Foxhaven Dr, Charlotte, NC 28277
7.6 mi from Matthews
★★★★★ 4.9 (532 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AlphaGood Appliance Repair
5619 Wyalong Dr, Charlotte, NC 28227
3.7 mi from Matthews
★★★★★ 5.0 (115 reviews)
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Matthews
Repair companies inside 30 miles60
Listing Saturday hours48
Mention washer work23
Three nearest companies, miles away0.5, 0.6, 0.6
Rated 4.5 stars or higher (10+ reviews)36
Mention commercial or laundromat work0

At the top of the Matthews list: K1 Pro Services (27.9 miles away, based in Dallas, 5.0 stars from 433 reviews, lists Saturday hours); Smartfix Appliance & Refrigerator Repair (6.5 miles away, based in Indian Trail, 4.9 stars from 438 reviews, lists Saturday hours); A One Appliance Repair & Plumbing Services (7.8 miles away, based in Charlotte, 5.0 stars from 83 reviews, lists Saturday hours); CLT Appliance Repair, LLC (9.6 miles away, based in Charlotte, 4.9 stars from 682 reviews, lists Saturday hours).

⚡ One call to reach a commercial laundry tech
☎(866) 293-4411

What Commercial Washer Repair Covers

Drains and sumpsCommercial washers dump water fast, often into a floor trough or sump. Slow drains, overflows and pump failures are common repair points.
Fill valves and water supplyLarge machines fill through bigger valves and hoses. Slow fills, cold-only fills or machines that keep filling point to valves, strainers or the building's water supply.
Top-load coin machinesCommercial top-load washers are built for constant use and share many parts with heavy home machines: lid locks, drive parts, inlet valves and drain pumps.
Washer-extractorsFront-load washer-extractors in laundromats, hotels and gyms spin hard and are often bolted to a concrete base. Bearings, drive parts and mounting bolts take more strain than on a home machine.

Signs a Commercial Washer Needs Service

  • Loud banging or shaking on the spin
  • Leaks under the machine or around the door
  • Door or lid stays locked after the cycle
  • Machine stops mid-cycle with an error

Have the data plate details ready and ask whether the technician works on your machine type before booking.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Budgeting for Commercial Repairs

Published ranges for washer repairs, for reference when a Matthews company quotes commercial work:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Matthews Owners Should Know

Most washer calls in Matthews come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Washer Repair Company in Matthews

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • What guarantee do you give on parts and labor?

Commercial Washer Repair FAQs: Matthews, NC

Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Do home appliance repair companies fix commercial washers?
Some do and some do not. Companies that mention commercial, laundromat or multifamily laundry work are listed first. When you call, ask whether they work on your machine brand and type, such as top-load coin machines, front-load washers or washer-extractors.
Which areas near Matthews do these technicians cover?
The companies on this page are within driving distance of Matthews. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Related Repair Pages for Matthews

Commercial Washer Repair Near Matthews

Before you call, note the brand, model and serial number from each machine's data plate, whether it is a top-load coin machine or a front-load washer-extractor, and any code on the display. A Matthews technician can then bring the right parts.

Tell us the machine and the problem and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech