Whirlpool owners in Hendersonville usually want two things from a repair company: experience with the brand and quick access to parts. The Hendersonville list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Whirlpool. If your washer is still under manufacturer coverage, contact Whirlpool directly.
Independent Whirlpool Washer Technicians, Hendersonville NC
Within 30 miles of Hendersonville there are 28 appliance repair companies in our data. 5 list an address in Hendersonville, and the rest are spread across Asheville (10), Brevard (3), and Arden (2). The farthest listed company is about 30 miles out. DP Appliance repair is the nearest, roughly 0.5 miles from Hendersonville. None of the repair companies near Hendersonville name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Across 28 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Hendersonville. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.5, 1.1, 2.7 |
|---|---|
| Open on Saturdays (per listing) | 13 |
| Repair companies inside 30 miles | 28 |
| Mention washer work | 4 |
| With 4.5+ stars and at least 10 reviews | 16 |
| Mention Whirlpool | 0 |
At the top of the Hendersonville list: Sears Appliance Repair (1.1 miles away, 4.5 stars from 145 reviews, lists Saturday hours); Mr. Appliance of Asheville (8.0 miles away, based in Fletcher, 4.8 stars from 1,708 reviews, lists Saturday hours); Sears Appliance Repair (18.4 miles away, based in Asheville, 4.5 stars from 193 reviews, lists Saturday hours); Sears Appliance Repair (16.6 miles away, based in Brevard, 4.5 stars from 45 reviews, lists Saturday hours).
Whirlpool Washer Lines and Features
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some models sense load size before filling, tumbling or spinning the drum briefly, and then set the water volume to match, so a partly filled tub is often normal. Source: Whirlpool - Why won't my washing machine fill with water
Common Whirlpool Washer Problems
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
- Washer shaking or walking. Remove the shipping bolts, adjust the feet until all four sit firmly on the floor, and spread heavy and light items evenly in the drum. Source: Whirlpool - Washer is Vibrating, Walking or Moving
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Water on the floor under or in front of the washer
- An error code on the display
- Grinding or roaring noise that rises with spin speed
How a Washer Service Call Usually Goes in Hendersonville
Keeping a Whirlpool Washer Running
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $150–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Hendersonville, NC
Most washer calls in Hendersonville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Before You Book in Hendersonville
- Do you work on front-load and top-load washers, or only one type?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: Hendersonville, NC
Which Hendersonville technicians work on Whirlpool?
How do I get rid of a washer mildew smell?
Why is my washer leaking?
Other Washer Repair in Hendersonville
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.