Most Whirlpool washer repairs in West St. Paul involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The West St. Paul list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Whirlpool Washer Repair Near West St. Paul
We found 40 appliance repair companies within 30 miles of West St. Paul. The rest are spread across St Paul (8), Minneapolis (7), and Bloomington (4). The farthest listed company is about 11 miles out. No company within 90 miles of West St. Paul mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Super Care Appliance Repair, about 0.2 miles away. Across 26 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Listing Saturday hours | 46 |
|---|---|
| Distance to the three closest (mi) | 0.2, 0.6, 1.1 |
| Companies within 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 20 |
| Name washers or washing machines in their listing | 9 |
| Mention Whirlpool | 0 |
Closest matches for West St. Paul: Super Care Appliance Repair (0.2 miles away, based in West St Paul, 4.9 stars from 1,075 reviews, lists Saturday hours); Omega Force Appliance Repair (4.7 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Sears Appliance Repair (9.5 miles away, based in Maplewood, 4.5 stars from 235 reviews, lists Saturday hours); Shortie's Appliances (10.5 miles away, based in Oakdale, 4.7 stars from 178 reviews, lists Saturday hours).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Some front load models have an owner-accessible drain pump filter at the lower front of the cabinet, usually reached by removing a small access panel or drawer. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Whirlpool Washer Symptoms and First Checks
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
Reading a Whirlpool Washer Error Code
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
When to Call for Whirlpool Washer Repair
- Washer will not spin, or clothes come out soaking wet
- An error code on the display
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in West St. Paul
Owner Care for Whirlpool Washers
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- How old the washer is
Around West St. Paul
Most washer calls in West St. Paul come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Before You Book in West St. Paul
- Will you check the drain pump filter and drain hose before replacing the pump?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: West St. Paul, MN
Why does my front-load washer smell?
Why won't my washer spin?
How do I find a technician who knows Whirlpool washers?
Why is my washer leaking?
Related Repair Pages for West St. Paul
Whirlpool Washer Repair Near West St. Paul
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.