Whirlpool owners in Lansing usually want two things from a repair company: experience with the brand and quick access to parts. Below are independent repair companies serving Lansing, with those that mention Whirlpool first, then the nearest appliance repair companies.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Independent Whirlpool Washer Technicians, Lansing MI
Within 30 miles of Lansing there are 12 appliance repair companies in our data. 5 list an address in Lansing, and the rest are spread across Holt (1), Bath Township (1), and Mason (1). The farthest listed company is about 28 miles out. No company within 90 miles of Lansing mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Elmorique Appliance Repair Lansing is the nearest, roughly 1.7 miles from Lansing. The 11 rated companies in range average 4.3 stars.
Companies are shown by relevance and distance from Lansing. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Listing Saturday hours | 8 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 4 |
| Name washers or washing machines in their listing | 3 |
| Mention Whirlpool | 0 |
| Companies within 30 miles | 12 |
| Distance to the three closest (mi) | 1.7, 2.4, 3.0 |
Closest matches for Lansing: Lane’s Appliance Sales and Service (3.2 miles away, 4.8 stars from 1,676 reviews, lists Saturday hours); Sears Appliance Repair (3.0 miles away, 4.3 stars from 311 reviews, lists Saturday hours); Shaw's Appliance Service - Servicing Dansville, Mason, Leslie, Holt, Lansing and East Lansing (12.5 miles away, based in Mason, 4.0 stars from 26 reviews); Ace Appliance Service, Inc (5.1 miles away, based in Holt, 4.9 stars from 39 reviews).
Whirlpool sells top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Whirlpool Washer Lines Technicians Work On
What Makes Whirlpool Washer Repairs Different
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
| LOC / LC | Control lock is turned on; touch or hold the Control Lock button to release it. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Water on the floor under or in front of the washer
- Musty or mildew smell from the drum or door seal
Inside a Washer Repair Visit
Keeping a Whirlpool Washer Running
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Price the repair before replacing a Whirlpool washer. Published ranges for common jobs:
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain pump replacement: $300–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Lansing
Most washer calls in Lansing come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Washer Repair Company in Lansing
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Lansing, MI
Why does my front-load washer smell?
What stops a washer from spinning?
Is this Whirlpool customer service?
Related Repair Pages for Lansing
More Whirlpool Washer Repair Pages Nearby
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.