If your Whirlpool washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. The Tonganoxie list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Independent Whirlpool Washer Technicians, Tonganoxie KS
Our data shows 36 appliance repair companies inside a 30-mile radius of Tonganoxie. Other nearby bases include Kansas City (10), Overland Park (9), and Lawrence (6). The farthest listed company is about 30 miles out. None of the repair companies near Tonganoxie name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Nearest on the list: Service Guard, around 12.4 miles out. The 31 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Listing Saturday hours | 22 |
|---|---|
| Appliance repair companies in range (30 mi) | 36 |
| Three nearest companies, miles away | 12.4, 12.7, 13.2 |
| Mention washer work | 3 |
| Mention Whirlpool | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 11 |
At the top of the Tonganoxie list: Sears Appliance Repair (15.1 miles away, based in Lawrence, 4.4 stars from 334 reviews, lists Saturday hours); Tager Appliance Repair (22.6 miles away, based in Olathe, 4.9 stars from 249 reviews, lists Saturday hours); Able Appliance Repair (26.5 miles away, based in Kansas City, 4.9 stars from 4,981 reviews, lists Saturday hours); Appliance Shark (26.5 miles away, based in Prairie Village, 4.9 stars from 118 reviews, lists Saturday hours).
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Whirlpool Washer Symptoms and First Checks
- Washer not spinning. Redistribute an unbalanced or overloaded load, cut back on detergent to avoid excess suds, and remember delicate cycles spin slowly. Source: Whirlpool - Front Load Washer is not Draining, not Spinning, or Leaving Wet Loads
- Washer won't start. Check that the washer is plugged in and the breaker has not tripped, turn off the control lock if it is on, and reset the washer by cutting power for at least a minute. Source: Whirlpool - How to reset a washing machine
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| F5 E2 | The door or lid lock cannot engage, often because something is blocking the latch area. Source: Whirlpool - Error Codes in Front Load Washers |
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| dEt | Detergent cartridge is not detected on models with a bulk dispenser. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Grinding or roaring noise that rises with spin speed
- Washer will not spin, or clothes come out soaking wet
- Washer fills slowly, will not fill, or keeps filling
Inside a Washer Repair Visit
Owner Care for Whirlpool Washers
- Leave the front load door ajar between loads and remove wet clothes promptly so moisture can dry out. Source: Whirlpool - Removing Odors or Smells - Front Load Washer
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
What Whirlpool Washer Repairs Cost
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- How old the washer is
Local Notes for Tonganoxie
Most washer calls in Tonganoxie come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Before You Book in Tonganoxie
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Do you work on front-load and top-load washers, or only one type?
- If the washer is leaking, will you find where the water starts before quoting a part?
Whirlpool Washer Repair FAQs: Tonganoxie, KS
What stops a washer from spinning?
Why does my front-load washer smell?
How do I find a technician who knows Whirlpool washers?
More Washing Machine Repair in Tonganoxie, KS
Whirlpool Washer Repair in Nearby Cities
Before you call, find the model and serial number on your Whirlpool washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.