A Whirlpool washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Great Bend list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Whirlpool Washers Near Great Bend
Within 60 miles of Great Bend there are 9 appliance repair companies in our data. 2 of them are based in Great Bend itself, and other nearby bases include Hays (5), Russell (1), and Pratt (1). Distances run up to about 50 miles. Of those, 1 mentions Whirlpool by name. Great Bend Appliance Center is the nearest, roughly 1.8 miles from Great Bend. Across 9 rated companies, the average public rating is 4.8 stars. Because the nearest shops are farther out, ask each company whether Great Bend is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Whirlpool | 1 |
|---|---|
| Companies within 60 miles | 9 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Listing Saturday hours | 4 |
| Name washers or washing machines in their listing | 1 |
| Distance to the three closest (mi) | 1.8, 9.4, 37.4 |
First up for Great Bend: Great Bend Appliance Center (1.8 miles away, 4.5 stars from 92 reviews, lists Saturday hours); Mickey's Appliance Repair (9.4 miles away, 4.6 stars from 36 reviews); Sears Appliance Repair (49.6 miles away, based in Pratt, 4.8 stars from 23 reviews, lists Saturday hours); Genuine Appliance Center (45.5 miles away, based in Hays, 4.7 stars from 77 reviews, lists Saturday hours).
Know which Whirlpool washer you have before you call. Whirlpool makes top-load agitator, top-load impeller, front-load, all-in-one combo, and commercial models, and the technician will ask.
Whirlpool Washer Lines and Features
What a Whirlpool Washer Technician Deals With
Both top and front load models will only run their spin when the lid or door switch registers the lid or door as fully closed and latched. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
Common Whirlpool Washer Problems
- Washer not draining. Confirm the lid or door is fully latched, then look for kinks or clogs in the drain hose and make sure the standpipe height is within range. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
Whirlpool Washer Error Codes
| Code | What it means |
|---|---|
| F7 E1 | Motor speed sensing problem; check that shipping bolts are removed and the washer is not overloaded. Source: Whirlpool - Error Codes in Front Load Washers |
| Int | The cycle was paused or canceled, and the washer may drain and spin for a while before it stops. Source: Whirlpool - Error Codes in Front Load Washers |
| rL / F34 | Items were left in the drum when the Clean Washer cycle was started. Source: Whirlpool - Error Codes in Front Load Washers |
Signs Your Whirlpool Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Burning smell or a motor that hums without turning
- Loud banging, shaking or walking during the spin
How a Washer Service Call Usually Goes in Great Bend
Care Whirlpool Recommends for Its Washers
- Clean the front load drain pump filter every few months or whenever lint builds up, on models that have one. Source: Whirlpool - Cleaning the Pump Filter - Front Load Washer
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Budgeting for a Whirlpool Washer Repair
A Whirlpool washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Lid switch replacement: $85–$160 Source: Fixr - How much does it cost to repair a washing machine?
- Door lock replacement: $110–$200 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Where the washer drains (standpipe or laundry sink)
- Whether it is a front loader, a top loader with an agitator, or a top loader with an impeller
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
What Great Bend Owners Should Know
Most washer calls in Great Bend come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
Questions to Ask a Great Bend Washer Technician
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Is your company licensed where my state requires it, and insured?
Whirlpool Washer Repair FAQs: Great Bend, KS
Is my Whirlpool washer worth repairing?
What should I do about a Whirlpool error code?
Is this Whirlpool customer service?
Where is the water under my washer coming from?
More Washing Machine Repair in Great Bend, KS
Whirlpool Washer Repair in Nearby Cities
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Whirlpool repair.