If your Electrolux washer has stopped draining, stopped spinning or started showing a code, the technician you call should know the model line. Below are independent repair companies serving Great Bend, with those that mention Electrolux first, then the nearest appliance repair companies.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Electrolux Washer Repair Near Great Bend
Our data shows 9 appliance repair companies inside a 60-mile radius of Great Bend. 2 of them are based in Great Bend itself, and the rest are spread across Hays (5), Russell (1), and Pratt (1). Distances run up to about 50 miles. None of the repair companies near Great Bend name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your machine before booking. Great Bend Appliance Center is the nearest, roughly 1.8 miles from Great Bend. Across 9 rated companies, the average public rating is 4.8 stars. Because the nearest shops are farther out, ask each company whether Great Bend is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention Electrolux | 0 |
|---|---|
| Distance to the three closest (mi) | 1.8, 9.4, 37.4 |
| Open on Saturdays (per listing) | 4 |
| Companies within 60 miles | 9 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Mention washer work | 1 |
At the top of the Great Bend list: Great Bend Appliance Center (1.8 miles away, 4.5 stars from 92 reviews, lists Saturday hours); Mickey's Appliance Repair (9.4 miles away, 4.6 stars from 36 reviews); Sears Appliance Repair (49.6 miles away, based in Pratt, 4.8 stars from 23 reviews, lists Saturday hours); Hays Appliance Service and Repair (40.2 miles away, based in Hays, 5.0 stars from 5 reviews).
Electrolux Washer Lines and Features
What Makes Electrolux Washer Repairs Different
The drain standpipe should be no taller than 96 inches and at least 1-1/4 inches across, and a hose sealed airtight into the standpipe can slow draining. Source: Electrolux - What should I do if my washer is draining slowly?
Electrolux Washer Symptoms and First Checks
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
- Washer draining slowly. Clear kinks or clogs in the drain hose, check standpipe height and diameter, loosen any airtight tape seal, and avoid overdosing detergent. Source: Electrolux - What should I do if my washer is draining slowly?
Reading a Electrolux Washer Error Code
| Code | What it means |
|---|---|
| E41 | The control board reads the door switch as open. Source: Electrolux - Front loading washer Error Code E41 door is open |
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Grinding or roaring noise that rises with spin speed
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
What Gets Fixed on a Great Bend Washer Call
Keeping a Electrolux Washer Running
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
Most Electrolux washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- Where the washer drains (standpipe or laundry sink)
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- How old the washer is
Laundry Notes for Great Bend, KS
Most washer calls in Great Bend come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Kansas, you can report a problem to the Kansas Attorney General Public Protection Division (Consumer Protection).
How to Choose a Washing Machine Technician Near Great Bend
- Can you give a written estimate before ordering parts?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the drain pump filter and drain hose before replacing the pump?
Electrolux Washer Repair FAQs: Great Bend, KS
Why won't my washer spin?
How do I find a technician who knows Electrolux washers?
Why does my Electrolux washer show an error code?
Other Washer Repair in Great Bend
Electrolux Washer Repair Near Great Bend
Also Serving Towns Around Great Bend
Live outside Great Bend? The same Electrolux washer repair technicians serve Pratt. See each town's own washing machine repair listings below.
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.