Most Whirlpool washer repairs in Stuart involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Stuart list starts with companies that name Whirlpool, followed by other appliance repair companies that work on washers.
Washing Machine Repair Near Me is independent and not affiliated with Whirlpool. Listed companies are independent technicians who repair Whirlpool washers and other brands.
Who Works on Whirlpool Washers Near Stuart
Within 30 miles of Stuart there are 40 appliance repair companies in our data. 7 list an address in Stuart, and the rest are spread across Port St. Lucie (10), Fort Pierce (7), and Jupiter (7). Distances run up to about 29 miles. No company within 90 miles of Stuart mentions Whirlpool by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Action Appliance Inc, about 0.5 miles away. Across 31 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Stuart. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Open on Saturdays (per listing) | 26 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 23 |
| Appliance repair companies in range (30 mi) | 43 |
| Mention washer work | 15 |
| Distance to the three closest (mi) | 0.5, 1.0, 1.1 |
| Mention Whirlpool | 0 |
First up for Stuart: A & J Appliance Repair Service (13.9 miles away, based in Port St. Lucie, 4.7 stars from 902 reviews, lists Saturday hours); Mr. Appliance of Port Saint Lucie (10.5 miles away, based in Port St. Lucie, 4.8 stars from 88 reviews); Appliance Care (8.5 miles away, based in Port St. Lucie, 4.9 stars from 561 reviews, lists Saturday hours); Mr. Appliance of Stuart (3.2 miles away, based in Palm City, 4.7 stars from 313 reviews).
Know Your Whirlpool Washer
What Makes Whirlpool Washer Repairs Different
The drain hose must run to a standpipe between 30 and 96 inches tall, since a higher drain can let water flow back into the washer. Source: Whirlpool - Top Load Washer not Draining, not Spinning, and/or Leaving Wet Loads
High-efficiency Whirlpool washers need HE detergent only, because excess suds can stop the pump from draining and the drum from spinning. Source: Whirlpool - HE Detergent use in a Washer
Common Whirlpool Washer Problems
- Washer leaking. Check that the inlet hoses have their rubber washers and snug connections at both ends, then make sure the drain hose is secure and the house drain is not backing up. Source: Whirlpool - Leaking Water Underneath - Washer
- Washer not filling. Make sure both hot and cold supply valves are fully open, the fill hoses are not kinked, and the inlet screens are not clogged with sediment. Source: Whirlpool - Why won't my washing machine fill with water
What Whirlpool Washer Codes Mean
| Code | What it means |
|---|---|
| Sud / Sd | Too many suds were detected, usually from non-HE or too much detergent. Source: Whirlpool - Error Codes in Front Load Washers |
| F9 E1 | Draining is taking longer than expected; check the drain hose and standpipe and avoid excess suds. Source: Whirlpool - Error Codes in Front Load Washers |
| F8 E1 / Lo FL | Low water flow into the washer; check the supply faucets, fill hoses and any anti-flood devices. Source: Whirlpool - Error Codes in Front Load Washers |
Whirlpool Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Water left in the drum after the cycle
- Grinding or roaring noise that rises with spin speed
What a Washing Machine Technician Checks
Keeping a Whirlpool Washer Running
- Check and brush clean the small mesh screens where the fill hoses connect at the back of the washer if filling slows. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
- Replace the water fill hoses about every five years. Source: Whirlpool - Checking the Fill Hoses if the Washer is not Filling
Brand guides: Whirlpool Washer Not Spinning or Draining: Fixes.
Whirlpool Washer Repair Cost Ranges
Most Whirlpool washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Transmission replacement: $200–$350 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Whirlpool Washer Call
- Where the washer drains (standpipe or laundry sink)
- Any error code shown on the display
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
Laundry Notes for Stuart, FL
Most washer calls in Stuart come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Florida's construction licensing guidance says that paid work such as installing a dishwasher connected to drinking water or replacing a water heater requires a licensed contractor, and that a local business tax receipt or certificate of competency may also apply; it does not describe a separate state appliance repair license. Source: DBPR License Requirements and Exemptions (Construction Industry Licensing Board), posted by Columbia County
In Florida, you can check a license with the DBPR Verify a License (MyFloridaLicense.com) or report a problem to the Florida Attorney General, Office of Citizen Services / Consumer Protection.
Questions to Ask a Stuart Washer Technician
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- Will you check the drain pump filter and drain hose before replacing the pump?
- What guarantee do you give on parts and labor?
Whirlpool Washer Repair FAQs: Stuart, FL
Why does my Whirlpool washer show an error code?
Why is my washer leaking?
Should I repair or replace my Whirlpool washer?
Other Washer Repair in Stuart
Whirlpool Washer Repair Near Stuart
Write down any error code your Whirlpool washer shows and at what point in the cycle it appears. It helps a Stuart technician bring the right parts.