Serving Connell, Washington and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Connell, WA

Washing machine repair from independent technicians serving Connell, with ratings, distances and what to check before you call.

Water sitting in the washer in Connell?
Tell us the brand and the problem and we will connect you with a technician near Connell.
☎(866) 293-4411
✓12 companies listed for Connell✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Connell and the Franklin County area, with companies that mention washer work shown first.

Washer Technicians Serving Connell, WA

14 repair companies serve Connell from within 60 miles. Other nearby bases include Pasco (3), Kennewick (3), and Walla Walla (3). Distances run up to about 57 miles. 3 list washing machine or washer work specifically. VSG Appliances is the nearest, roughly 31.8 miles from Connell. The 14 rated companies in range average 4.3 stars. Connell is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Fred's Appliance
383 S Columbia Center Blvd, Kennewick, WA 99336
36.3 mi from Connell
★★★★ 4.1 (731 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Master's Appliance & Refrigeration, LLC
310 W Clark St, Pasco, WA 99301
32.0 mi from Connell
★★★★ 4.2 (77 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
312 S Division St, Moses Lake, WA 98837
38.3 mi from Connell
★★★★ 3.9 (98 reviews)
Mentions LG, Samsung, GEMentions washersSaturday hours
Appliance Repair
Smart Appliance Repair
1407 Judson Ave, Richland, WA 99354
33.2 mi from Connell
★★★★★ 4.8 (104 reviews)
Saturday hours
Appliance Repair
UDG Services LLC
433 Liberty Ln, Richland, WA 99352
36.3 mi from Connell
★★★★★ 4.9 (142 reviews)
Appliance Repair
VSG Appliances
1803 W Court St, Pasco, WA 99301
31.8 mi from Connell
★★★★★ 4.9 (158 reviews)
Saturday hours
Appliance Repair
Kurios Repair
3604 W 5th Ct, Kennewick, WA 99336
35.3 mi from Connell
★★★★½ 4.6 (78 reviews)
Saturday hours
Appliance Repair
Batteries Plus Phone Repair
632 S 9th Ave, Walla Walla, WA 99362
48.0 mi from Connell
★★★★★ 4.8 (45 reviews)
Saturday hours
Appliance Repair
Columbia Appliance
1110 6th St #2, Umatilla, OR 97882
56.7 mi from Connell
★★★★★ 4.9 (423 reviews)
Saturday hours
Appliance Repair
Valley Blue Appliance Repair
259 Sapolil Rd, Walla Walla, WA 99362
47.7 mi from Connell
★★★★★ 5.0 (21 reviews)
Saturday hours
Appliance Repair
Tompkins Appliance Services
270 E Boeing Ave, Walla Walla, WA 99362
47.9 mi from Connell
★★★★½ 4.5 (72 reviews)
Appliance Repair
All City Appliance
1514 W 41st Ave, Kennewick, WA 99337
36.7 mi from Connell
★★★ 3.1 (20 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Washer repair near Connell at a glance
Companies within 60 miles14
Mention a major washer brand1
With 4.5+ stars and at least 10 reviews8
Open on Saturdays (per listing)8
Distance to the three closest (mi)31.8, 32.0, 32.5
Name washers or washing machines in their listing3

First up for Connell: Fred's Appliance (36.3 miles away, based in Kennewick, 4.1 stars from 731 reviews, lists Saturday hours); Master's Appliance & Refrigeration, LLC (32.0 miles away, based in Pasco, 4.2 stars from 77 reviews); Sears Appliance Repair (38.3 miles away, based in Moses Lake, 3.9 stars from 98 reviews, lists Saturday hours); Smart Appliance Repair (33.2 miles away, based in Richland, 4.8 stars from 104 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • An error code on the display
  • Musty or mildew smell from the drum or door seal
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Connell Washer Call

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not filling with water or washer not draining.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Do not let children play in, on or with a washer, and remove the lid or door before a washer is discarded or taken out of service so a child cannot become trapped inside. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Connell

Most washer calls in Connell come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Questions to Ask a Connell Washer Technician

  • What guarantee do you give on parts and labor?
  • Will you check the drain pump filter and drain hose before replacing the pump?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Connell, WA

Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Connell

Washing Machine Repair Near Connell

Before you call a Connell technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech