Serving Channelview, Texas and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Channelview, TX

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Channelview.

Water sitting in the washer in Channelview?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Channelview✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. This page lists independent appliance repair companies serving Channelview and the Harris County area, with companies that mention washer work shown first.

Washer Technicians Serving Channelview, TX

We found 40 appliance repair companies within 30 miles of Channelview. 3 list an address in Channelview, and the rest are spread across Pasadena (15), Houston (9), and Baytown (6). The farthest listed company is about 14 miles out. 10 list washing machine or washer work specifically. Nearest on the list: United Appliance Repair, around 0.7 miles out. Across 32 rated companies, the average public rating is 4.6 stars.

Washer & Dryer Repair
Quality Repairs
18702 Tranquility Dr, Humble, TX 77346
14.1 mi from Channelview
★★★★★ 4.9 (554 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Superior Appliances Repair
2501 Preston Ave Suite#2507, Pasadena, TX 77503
8.7 mi from Channelview
★★★★★ 4.9 (81 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Operation: Save Appliance
5124 Parsley Ave, Baytown, TX 77521
6.9 mi from Channelview
★★★★★ 5.0 (74 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1000 San Jacinto Mall, Baytown, TX 77521
7.9 mi from Channelview
★★★★½ 4.6 (187 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Baytown
606 Rollingbrook Dr Ste 2M, Baytown, TX 77521
9.0 mi from Channelview
★★★★★ 4.9 (104 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
999 Pasadena Blvd, Pasadena, TX 77506
8.4 mi from Channelview
★★★★½ 4.5 (271 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Cannon Appliance Repair
707 Lindenwood Dr, Baytown, TX 77520
9.1 mi from Channelview
★★★★★ 5.0 (50 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Deer Park
3222 Burke Rd Ste 209E, Pasadena, TX 77504
9.9 mi from Channelview
★★★★★ 4.8 (190 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
6793 Spencer Hwy, Pasadena, TX 77505
8.7 mi from Channelview
★★★★½ 4.5 (31 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
5932 Fairmont Pkwy, Pasadena, TX 77505
10.1 mi from Channelview
★★★★½ 4.4 (85 reviews)
Mentions washersSaturday hours
Appliance Repair
Perry's Appliance Repair
2918 N Main St, Baytown, TX 77521
9.4 mi from Channelview
★★★★ 3.8 (91 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Pros Houston
804 Main St, Houston, TX 77002
15.1 mi from Channelview
★★★★★ 5.0 (5 reviews)
Mentions washersSaturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Channelview
Appliance repair companies in range (30 mi)60
Mention a major washer brand0
Distance to the three closest (mi)0.7, 0.7, 1.0
Mention washer work17
Rated 4.5 stars or higher (10+ reviews)21
Open on Saturdays (per listing)41

First up for Channelview: Quality Repairs (14.1 miles away, based in Humble, 4.9 stars from 554 reviews, lists Saturday hours); Superior Appliances Repair (8.7 miles away, based in Pasadena, 4.9 stars from 81 reviews, lists Saturday hours); Operation: Save Appliance (6.9 miles away, based in Baytown, 5.0 stars from 74 reviews, lists Saturday hours); Sears Appliance Repair (7.9 miles away, based in Baytown, 4.6 stars from 187 reviews, lists Saturday hours).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Musty or mildew smell from the drum or door seal
  • An error code on the display
  • Water left in the drum after the cycle
  • Loud banging, shaking or walking during the spin

What Usually Goes Wrong

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

How a Washer Service Call Usually Goes in Channelview

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with washer smells like mildew or washer not spinning.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

What Washer Repair Costs in Channelview

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Channelview

Most washer calls in Channelview come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)

In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.

How to Choose a Washing Machine Technician Near Channelview

  • What guarantee do you give on parts and labor?
  • Is your company licensed where my state requires it, and insured?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Channelview, TX

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Do you cover Channelview and nearby towns?
The companies on this page are within driving distance of Channelview. Each one sets its own service area, so check the distance shown and confirm your address when you call.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Find Your Washer Brand in Channelview

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Channelview technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech