Serving Silverton, Oregon and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Silverton, OR

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Silverton.

Washer down in Silverton?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Silverton✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Silverton, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. Below are the companies within reach of Silverton, sorted by how closely they match washing machine work, then by distance and public ratings.

Local Washing Machine Repair in Silverton, OR

Within 30 miles of Silverton there are 40 appliance repair companies in our data. The rest are spread across Oregon City (8), Salem (7), and Lake Oswego (4). Distances run up to about 29 miles. Nearest on the list: Sears Appliance Repair, around 10.9 miles out. 5 list washing machine or washer work specifically. Across 30 rated companies, the average public rating is 4.6 stars.

Washer & Dryer Repair
Mr. Appliance of Portland
6950 SW Hampton St Ste 116, Portland, OR 97223
29.3 mi from Silverton
★★★★★ 4.8 (691 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ATS Appliance Repair
2374 NW McGarey Dr, McMinnville, OR 97128
26.4 mi from Silverton
★★★★★ 4.9 (395 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Hebert's Appliance Solutions
408 S Beavercreek Rd #404, Oregon City, OR 97045
24.6 mi from Silverton
★★★★★ 4.8 (85 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
827 Lancaster Dr NE, Salem, OR 97301
10.9 mi from Silverton
★★★★½ 4.3 (140 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Krohn's Appliance Service LLC
2207 E Portland Rd # C, Newberg, OR 97132
22.5 mi from Silverton
★★★★½ 4.6 (49 reviews)
Mentions washers
Washer & Dryer Repair
HVAC & Appliance Repair Guys
4582 Hastings Pl, Lake Oswego, OR 97035
29.1 mi from Silverton
★★★★★ 4.9 (0 reviews)
Mentions washers
Appliance Repair
Appliance Hospital - Salem
3003 Alberta Ave NE, Salem, OR 97301
11.3 mi from Silverton
★★★★½ 4.5 (226 reviews)
Appliance Repair
Givens Appliance Repair
256 Browning Ave SE, Salem, OR 97302
15.1 mi from Silverton
★★★★★ 4.9 (87 reviews)
Appliance Repair
Xigent Appliance Repair, Inc.
2225 Pacific Blvd SE #104, Albany, OR 97321
29.2 mi from Silverton
★★★★★ 4.8 (1,237 reviews)
Appliance Repair
Bogard Appliances and Refrigeration, LLC
1985 Park Ave NE, Salem, OR 97301
11.3 mi from Silverton
★★★★★ 4.9 (100 reviews)
Appliance Repair
United Repair Co
1081 Broadway St NE, Salem, OR 97301
12.8 mi from Silverton
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
JL's Appliances
958 Edgewater St NW, Salem, OR 97304
14.0 mi from Silverton
★★★★½ 4.5 (330 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Silverton repair companies in numbers
Distance to the three closest (mi)10.9, 11.3, 11.3
With 4.5+ stars and at least 10 reviews12
Companies within 30 miles46
Mention a major washer brand0
Name washers or washing machines in their listing6
Listing Saturday hours22

First up for Silverton: Mr. Appliance of Portland (29.3 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours); ATS Appliance Repair (26.4 miles away, based in McMinnville, 4.9 stars from 395 reviews, lists Saturday hours); Hebert's Appliance Solutions (24.6 miles away, based in Oregon City, 4.8 stars from 85 reviews); Sears Appliance Repair (10.9 miles away, based in Salem, 4.3 stars from 140 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • An error code on the display
  • Burning smell or a motor that hums without turning
  • Grinding or roaring noise that rises with spin speed

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

How a Washer Service Call Usually Goes in Silverton

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Silverton

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Silverton

Most washer calls in Silverton come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

How to Choose a Washing Machine Technician Near Silverton

  • What guarantee do you give on parts and labor?
  • If a part has to be ordered, how soon can you come back to finish?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Silverton, OR

How much does washing machine repair cost in Silverton?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Washer Repair by Brand in Silverton

Washing Machine Repair in Nearby Cities

Before you call a Silverton technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech