Serving Canby, Oregon and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Canby, OR

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Canby.

Water sitting in the washer in Canby?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Canby✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washing Machine Repair Companies Near Canby

40 repair companies serve Canby from within 30 miles. 1 of them are based in Canby itself, and the rest are spread across Oregon City (8), Tigard (6), and Lake Oswego (5). Distances run up to about 14 miles. Nearest on the list: Canby Appliance Repair, around 0.4 miles out. 7 of them mention washing machine or washer work in their listing or website. Across 27 rated companies, the average public rating is 4.7 stars.

Washer & Dryer Repair
Mr. Appliance of Portland
6950 SW Hampton St Ste 116, Portland, OR 97223
11.6 mi from Canby
★★★★★ 4.8 (691 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Home-Serv Appliance Repair
12363 SE Linwood Ave, Portland, OR 97222
12.4 mi from Canby
★★★★★ 5.0 (331 reviews)
Mentions washers
Washer & Dryer Repair
A&P Appliance Parts and Service
12625 SW Broadway St, Beaverton, OR 97005
16.4 mi from Canby
★★★★½ 4.7 (257 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Hebert's Appliance Solutions
408 S Beavercreek Rd #404, Oregon City, OR 97045
6.6 mi from Canby
★★★★★ 4.8 (85 reviews)
Mentions washers
Washer & Dryer Repair
Mr. Appliance of Clackamas
10762 SE Hwy 212, Clackamas, OR 97015
11.8 mi from Canby
★★★★★ 4.9 (83 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Fix All Appliance Repair
3720 S Bond Ave #326, Portland, OR 97239
16.0 mi from Canby
★★★★★ 4.8 (46 reviews)
Mentions washers
Washer & Dryer Repair
Krohn's Appliance Service LLC
2207 E Portland Rd # C, Newberg, OR 97132
13.4 mi from Canby
★★★★½ 4.6 (49 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
11800 SE 82nd Ave, Happy Valley, OR 97086
12.9 mi from Canby
★★★★½ 4.4 (301 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Portland
80 SE Madison St Ste 234, Portland, OR 97214
17.1 mi from Canby
★★★★★ 5.0 (18 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
HVAC & Appliance Repair Guys
4582 Hastings Pl, Lake Oswego, OR 97035
11.0 mi from Canby
★★★★★ 4.9 (0 reviews)
Mentions washers
Washer & Dryer Repair
Smooth Appliance Services LLC
6312 SW Capitol Hwy Ste. 231, Portland, OR 97239
14.7 mi from Canby
★★★½ 3.4 (34 reviews)
Mentions washers
Washer & Dryer Repair
Oregon Appliance Repair
121 SW Salmon St #1100, Portland, OR 97204
17.3 mi from Canby
★★★ 3.0 (45 reviews)
Mentions washers

Companies are shown by relevance and distance from Canby. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Canby
Rated 4.5 stars or higher (10+ reviews)15
Distance to the three closest (mi)0.4, 4.9, 5.8
Mention a major washer brand0
Open on Saturdays (per listing)35
Mention washer work10
Companies within 30 miles60

First up for Canby: Mr. Appliance of Portland (11.6 miles away, based in Portland, 4.8 stars from 691 reviews, lists Saturday hours); Home-Serv Appliance Repair (12.4 miles away, based in Portland, 5.0 stars from 331 reviews); A&P Appliance Parts and Service (16.4 miles away, based in Beaverton, 4.7 stars from 257 reviews, lists Saturday hours); Hebert's Appliance Solutions (6.6 miles away, based in Oregon City, 4.8 stars from 85 reviews).

⚡ Get connected with a washer technician near Canby
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed
  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal

What Usually Goes Wrong

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

Inside a Washer Repair Visit

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not draining.

Leaks and Safe Shutoff

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Canby

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Canby

Most washer calls in Canby come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

How to Choose a Washing Machine Technician Near Canby

  • How often do you repair your brand washers, and how quickly can you get parts?
  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Canby, OR

Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Washer Repair by Brand in Canby

Washing Machine Repair in Nearby Cities

Before you call a Canby technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech