Serving Lebanon, Oregon and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Lebanon, OR

See which appliance repair companies around Lebanon work on washing machines, how far away they are and how customers rate them.

Need washer repair in Lebanon?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Lebanon✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Lebanon and the Linn County area, with companies that mention washer work shown first.

Who Repairs Washers Near Lebanon

Our data shows 13 appliance repair companies inside a 30-mile radius of Lebanon. Other nearby bases include Salem (7), Albany (2), and Corvallis (2). Distances run up to about 30 miles. 2 list washing machine or washer work specifically. Nearest on the list: Mike's Appliance Repair, around 9.4 miles out. Across 12 rated companies, the average public rating is 4.6 stars.

Washer & Dryer Repair
Sears Appliance Repair
400 NE Circle Blvd, Corvallis, OR 97330
17.4 mi from Lebanon
★★★★½ 4.5 (131 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
827 Lancaster Dr NE, Salem, OR 97301
28.6 mi from Lebanon
★★★★½ 4.3 (140 reviews)
Mentions washersSaturday hours
Appliance Repair
Xigent Appliance Repair, Inc.
2225 Pacific Blvd SE #104, Albany, OR 97321
11.1 mi from Lebanon
★★★★★ 4.8 (1,237 reviews)
Appliance Repair
Givens Appliance Repair
256 Browning Ave SE, Salem, OR 97302
26.2 mi from Lebanon
★★★★★ 4.9 (87 reviews)
Appliance Repair
Appliance Hospital - Salem
3003 Alberta Ave NE, Salem, OR 97301
29.2 mi from Lebanon
★★★★½ 4.5 (226 reviews)
Appliance Repair
United Repair Co
1081 Broadway St NE, Salem, OR 97301
29.5 mi from Lebanon
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
Bogard Appliances and Refrigeration, LLC
1985 Park Ave NE, Salem, OR 97301
29.5 mi from Lebanon
★★★★★ 4.9 (100 reviews)
Appliance Repair
JL's Appliances
958 Edgewater St NW, Salem, OR 97304
29.3 mi from Lebanon
★★★★½ 4.5 (330 reviews)
Appliance Repair
Mike's Appliance Repair
2786 Three Lakes Rd SE #200, Albany, OR 97322
9.4 mi from Lebanon
★★★★½ 4.4 (69 reviews)
Appliance Repair
Master Appliance
145 Knox St N, Monmouth, OR 97361
27.2 mi from Lebanon
★★★★½ 4.5 (82 reviews)
Appliance Repair
Genie Appliance Repair
994 Hickory St, Independence, OR 97351
25.8 mi from Lebanon
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Dedicated Appliance Repair Corvallis
1755 NW Arthur Cir, Corvallis, OR 97330
18.4 mi from Lebanon
★★★★★ 5.0 (1 review)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Lebanon repair companies in numbers
Appliance repair companies in range (30 mi)13
Mention washer work2
Listing Saturday hours5
Distance to the three closest (mi)9.4, 11.1, 17.4
Rated 4.5 stars or higher (10+ reviews)7
Mention a major washer brand0

The leading options for Lebanon are Sears Appliance Repair (17.4 miles away, based in Corvallis, 4.5 stars from 131 reviews, lists Saturday hours); Sears Appliance Repair (28.6 miles away, based in Salem, 4.3 stars from 140 reviews, lists Saturday hours); Xigent Appliance Repair, Inc. (11.1 miles away, based in Albany, 4.8 stars from 1,237 reviews); Givens Appliance Repair (26.2 miles away, based in Salem, 4.9 stars from 87 reviews).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Washer fills slowly, will not fill, or keeps filling
  • An error code on the display
  • Water on the floor under or in front of the washer
  • Water left in the drum after the cycle

What Usually Goes Wrong

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.

Inside a Washer Repair Visit

Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer not filling with water or washer not draining.

Before Anyone Touches the Washer

Always install new inlet hoses rather than reusing old ones, check them from time to time, and replace any hose that shows bulges, kinks, cuts, wear or leaks. Source: Whirlpool - Washer Installation Instructions

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Lebanon, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Lebanon

Most washer calls in Lebanon come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

Questions to Ask a Lebanon Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Lebanon, OR

Do you cover Lebanon and nearby towns?
The companies on this page are within driving distance of Lebanon. Each one sets its own service area, so check the distance shown and confirm your address when you call.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Washer Repair by Brand in Lebanon

Washing Machine Repair Near Lebanon

Before you call a Lebanon technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Lebanon
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech