Serving Independence, Oregon and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Independence, OR

See which appliance repair companies around Independence work on washing machines, how far away they are and how customers rate them.

Washer down in Independence?
Tell us the brand and the problem and we will connect you with a technician near Independence.
☎(866) 293-4411
✓12 companies listed for Independence✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. This page lists independent appliance repair companies serving Independence and the Polk County area, with companies that mention washer work shown first.

Washing Machine Repair Companies Near Independence

We found 15 appliance repair companies within 30 miles of Independence. 1 of them are based in Independence itself, and other nearby bases include Salem (7), Albany (2), and Corvallis (2). Nearest on the list: Genie Appliance Repair, around 0.9 miles out. 3 of them mention washing machine or washer work in their listing or website. Across 14 rated companies, the average public rating is 4.7 stars.

Washer & Dryer Repair
ATS Appliance Repair
2374 NW McGarey Dr, McMinnville, OR 97128
25.6 mi from Independence
★★★★★ 4.9 (395 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
827 Lancaster Dr NE, Salem, OR 97301
11.9 mi from Independence
★★★★½ 4.3 (140 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
400 NE Circle Blvd, Corvallis, OR 97330
18.8 mi from Independence
★★★★½ 4.5 (131 reviews)
Mentions washersSaturday hours
Appliance Repair
Xigent Appliance Repair, Inc.
2225 Pacific Blvd SE #104, Albany, OR 97321
16.2 mi from Independence
★★★★★ 4.8 (1,237 reviews)
Appliance Repair
Givens Appliance Repair
256 Browning Ave SE, Salem, OR 97302
7.6 mi from Independence
★★★★★ 4.9 (87 reviews)
Appliance Repair
Appliance Hospital - Salem
3003 Alberta Ave NE, Salem, OR 97301
11.6 mi from Independence
★★★★½ 4.5 (226 reviews)
Appliance Repair
United Repair Co
1081 Broadway St NE, Salem, OR 97301
10.3 mi from Independence
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
JL's Appliances
958 Edgewater St NW, Salem, OR 97304
9.2 mi from Independence
★★★★½ 4.5 (330 reviews)
Appliance Repair
Bogard Appliances and Refrigeration, LLC
1985 Park Ave NE, Salem, OR 97301
11.7 mi from Independence
★★★★★ 4.9 (100 reviews)
Appliance Repair
Master Appliance
145 Knox St N, Monmouth, OR 97361
2.0 mi from Independence
★★★★½ 4.5 (82 reviews)
Appliance Repair
Les' Appliance Services.
823 NW Meadows Dr, McMinnville, OR 97128
24.8 mi from Independence
★★★★★ 4.9 (54 reviews)
Appliance Repair
Genie Appliance Repair
994 Hickory St, Independence, OR 97351
0.9 mi from Independence
★★★★★ 5.0 (3 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Independence repair companies in numbers
With 4.5+ stars and at least 10 reviews9
Mention a major washer brand0
Listing Saturday hours6
Repair companies inside 30 miles15
Mention washer work3
Three nearest companies, miles away0.9, 2.0, 7.6

At the top of the Independence list: ATS Appliance Repair (25.6 miles away, based in McMinnville, 4.9 stars from 395 reviews, lists Saturday hours); Sears Appliance Repair (11.9 miles away, based in Salem, 4.3 stars from 140 reviews, lists Saturday hours); Sears Appliance Repair (18.8 miles away, based in Corvallis, 4.5 stars from 131 reviews, lists Saturday hours); Xigent Appliance Repair, Inc. (16.2 miles away, based in Albany, 4.8 stars from 1,237 reviews).

⚡ Get connected with a washer technician near Independence
☎(866) 293-4411

When to Call for Washer Repair

  • Water on the floor under or in front of the washer
  • Washer fills slowly, will not fill, or keeps filling
  • Grinding or roaring noise that rises with spin speed
  • Washer will not start or the lid or door stays locked

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Independence Washer Call

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not draining or washer smells like mildew.

If Your Washer Is Leaking

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Independence

Before replacing a washer in Independence, price the repair. Here is what published cost guides report for common jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Independence Owners Should Know

Most washer calls in Independence come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)

In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.

Questions to Ask a Independence Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • If the washer is leaking, will you find where the water starts before quoting a part?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Independence, OR

Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Find Your Washer Brand in Independence

More Washing Machine Repair Pages Nearby

Before you call a Independence technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech