Serving Ponca City, Oklahoma and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Ponca City, OK

Washing machine repair from independent technicians serving Ponca City, with ratings, distances and what to check before you call.

Need washer repair in Ponca City?
Tell us the brand and the problem and we will connect you with a technician near Ponca City.
☎(866) 293-4411
✓12 companies listed for Ponca City✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Ponca City and the Kay County area, with companies that mention washer work shown first.

Who Repairs Washers Near Ponca City

Our data shows 16 appliance repair companies inside a 60-mile radius of Ponca City. Other nearby bases include Enid (5), Stillwater (4), and Arkansas City (1). Distances run up to about 55 miles. 4 of them mention washing machine or washer work in their listing or website. The closest is Ron's Appliance Repair., about 25.5 miles away. The 15 rated companies in range average 4.2 stars. Ponca City is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Alliance Appliance Repair
2102 S Main St, Stillwater, OK 74074
43.2 mi from Ponca City
★★★★★ 4.9 (323 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Affordable Appliance Solutions
113 W 9th Ave, Winfield, KS 67156
35.9 mi from Ponca City
★★★★★ 4.9 (40 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
1001 S Main St, Stillwater, OK 74074
42.3 mi from Ponca City
★★★★½ 4.7 (154 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
214 S Washington Ave, Wellington, KS 67152
41.6 mi from Ponca City
★★★★½ 4.6 (277 reviews)
Mentions washersSaturday hours
Appliance Repair
Ron's Appliance Repair.
9193 270th Dr, Arkansas City, KS 67005
25.5 mi from Ponca City
★★★★½ 4.3 (7 reviews)
Appliance Repair
Advanced Appliance Service - Stillwater
712 E 6th Ave D, Stillwater, OK 74074
42.0 mi from Ponca City
★★★★★ 5.0 (2 reviews)
Appliance Repair
Rocky's Appliance Services
1001 1/2 Delaware, Perry, OK 73077
32.6 mi from Ponca City
★★★★ 4.2 (17 reviews)
Saturday hours
Appliance Repair
Mr. Mixer
790 US-77, Douglass, KS 67039
54.6 mi from Ponca City
★★★★★ 4.8 (128 reviews)
Appliance Repair
Vacuum Center
907 W Maine St, Enid, OK 73701
50.9 mi from Ponca City
★★★★★ 4.9 (37 reviews)
Saturday hours
Appliance Repair
James Appliance
3913 S Henderson St, Stillwater, OK 74074
44.7 mi from Ponca City
★★★★★ 5.0 (2 reviews)
Appliance Repair
Durheim Appliance Services
1302 W Randolph Ave, Enid, OK 73703
51.0 mi from Ponca City
★★★★ 3.9 (30 reviews)
Saturday hours
Appliance Repair
DAVIS APPLIANCE SERVICE LLCC
1626 W Willow Rd Apt 3, Enid, OK 73703
50.7 mi from Ponca City
★★★½ 3.4 (27 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Washer repair near Ponca City at a glance
Repair companies inside 60 miles16
With 4.5+ stars and at least 10 reviews6
Distance to the three closest (mi)25.5, 32.6, 35.9
Open on Saturdays (per listing)9
Name washers or washing machines in their listing4
Mention a major washer brand0

The leading options for Ponca City are Alliance Appliance Repair (43.2 miles away, based in Stillwater, 4.9 stars from 323 reviews, lists Saturday hours); Affordable Appliance Solutions (35.9 miles away, based in Winfield, 4.9 stars from 40 reviews); Sears Appliance Repair (42.3 miles away, based in Stillwater, 4.7 stars from 154 reviews, lists Saturday hours); Sears Appliance Repair (41.6 miles away, based in Wellington, 4.6 stars from 277 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

When to Call for Washer Repair

  • Loud banging, shaking or walking during the spin
  • An error code on the display
  • Washer fills slowly, will not fill, or keeps filling
  • Washer will not spin, or clothes come out soaking wet

The Usual Washer Culprits in Ponca City

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

How a Washer Service Call Usually Goes in Ponca City

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer smells like mildew or washer not filling with water.

Water, Power and Safety First

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Ponca City

Before replacing a washer in Ponca City, price the repair. Here is what published cost guides report for common jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Ponca City Owners Should Know

Most washer calls in Ponca City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.

How to Choose a Washing Machine Technician Near Ponca City

  • Can you give a written estimate before ordering parts?
  • If a part has to be ordered, how soon can you come back to finish?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Ponca City, OK

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.

Brand-Specific Washer Repair, Ponca City

More Washing Machine Repair Pages Nearby

Before you call a Ponca City technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Ponca City
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech