Serving Alliance, Nebraska and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Alliance, NE

A local list of washer repair companies near Alliance, NE, sorted by how closely they match the work, then by distance and public ratings.

Need washer repair in Alliance?
Tell us the brand and the problem and we will connect you with a technician near Alliance.
☎(866) 293-4411
✓6 companies listed for Alliance✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washer Technicians Serving Alliance, NE

Our data shows 6 appliance repair companies inside a 114-mile radius of Alliance. The rest are spread across Sterling (2), Scottsbluff (1), and Sidney (1). Distances run up to about 114 miles. Of those, 2 mention washing machine or washer work by name. Thompson Appliance Repair Inc is the nearest, roughly 43.1 miles from Alliance. Across 6 rated companies, the average public rating is 4.1 stars. Alliance is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Elite Appliance Repair
8220 Lapaz Dr, Cheyenne, WY 82009
113.5 mi from Alliance
★★★★★ 4.9 (54 reviews)
Mentions washersSaturday hours
Appliance Repair
Thompson Appliance Repair Inc
1004 E Overland, Scottsbluff, NE 69361
43.1 mi from Alliance
★★★★½ 4.5 (29 reviews)
Washer & Dryer Repair
Sears Appliance Repair
130 Broadway St, Sterling, CO 80751
102.9 mi from Alliance
★★½ 2.6 (5 reviews)
Mentions washersSaturday hours
Appliance Repair
Palmer Sales and Service
Sidney, NE 69162
66.4 mi from Alliance
★★★★ 4.2 (5 reviews)
Saturday hours
Appliance Repair
Bennett's Appliance Services
306 N 4th St, Hot Springs, SD 57747
96.9 mi from Alliance
★★★★★ 5.0 (1 review)
Appliance Repair
The Appliance Guys llc
1119 Westview Ct, Sterling, CO 80751
104.4 mi from Alliance
★★★½ 3.4 (15 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Alliance
Distance to the three closest (mi)43.1, 66.4, 96.9
With 4.5+ stars and at least 10 reviews2
Open on Saturdays (per listing)3
Mention a major washer brand0
Companies within 114 miles6
Mention washer work2

First up for Alliance: Elite Appliance Repair (113.5 miles away, based in Cheyenne, 4.9 stars from 54 reviews, lists Saturday hours); Thompson Appliance Repair Inc (43.1 miles away, based in Scottsbluff, 4.5 stars from 29 reviews); Sears Appliance Repair (102.9 miles away, based in Sterling, 2.6 stars from 5 reviews, lists Saturday hours); Palmer Sales and Service (66.4 miles away, based in Sidney, 4.2 stars from 5 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Loud banging, shaking or walking during the spin
  • Washer fills slowly, will not fill, or keeps filling
  • Water left in the drum after the cycle
  • Washer will not spin, or clothes come out soaking wet

Why Washing Machines Break Down

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

Inside a Washer Repair Visit

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with washer not draining or washer not filling with water.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Alliance, NE

Most washer calls in Alliance come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register

In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.

Questions to Ask a Alliance Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?

Washing Machine Repair FAQs: Alliance, NE

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
How much does washing machine repair cost in Alliance?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Find Your Washer Brand in Alliance

Washing Machine Repair Near Alliance

Before you call a Alliance technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech