Serving Alliance, Nebraska and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Maytag Washer Repair in Alliance, NE

Independent repair companies near Alliance that work on Maytag washers, with companies that mention Maytag listed first.

Talk to a Maytag washer tech in Alliance
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓6 companies listed for Alliance✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag washer repairs in Alliance involve the same few systems: the drain pump, the lid or door lock, the drive, the water supply and the controls. The Alliance list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.

Washing Machine Repair Near Me is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag washers and other brands.

Independent Maytag Washer Technicians, Alliance NE

We found 6 appliance repair companies within 114 miles of Alliance. The rest are spread across Sterling (2), Scottsbluff (1), and Sidney (1). The farthest listed company is about 114 miles out. No company within 90 miles of Alliance mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Thompson Appliance Repair Inc is the nearest, roughly 43.1 miles from Alliance. The 6 rated companies in range average 4.1 stars. Alliance is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Thompson Appliance Repair Inc
1004 E Overland, Scottsbluff, NE 69361
43.1 mi from Alliance
★★★★½ 4.5 (29 reviews)
Washer & Dryer Repair
Elite Appliance Repair
8220 Lapaz Dr, Cheyenne, WY 82009
113.5 mi from Alliance
★★★★★ 4.9 (54 reviews)
Mentions washersSaturday hours
Appliance Repair
Palmer Sales and Service
Sidney, NE 69162
66.4 mi from Alliance
★★★★ 4.2 (5 reviews)
Saturday hours
Washer & Dryer Repair
Sears Appliance Repair
130 Broadway St, Sterling, CO 80751
102.9 mi from Alliance
★★½ 2.6 (5 reviews)
Mentions washersSaturday hours
Appliance Repair
Bennett's Appliance Services
306 N 4th St, Hot Springs, SD 57747
96.9 mi from Alliance
★★★★★ 5.0 (1 review)
Appliance Repair
The Appliance Guys llc
1119 Westview Ct, Sterling, CO 80751
104.4 mi from Alliance
★★★½ 3.4 (15 reviews)

Companies are shown by relevance and distance from Alliance. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Alliance, NE
Companies within 114 miles6
With 4.5+ stars and at least 10 reviews2
Three nearest companies, miles away43.1, 66.4, 96.9
Mention Maytag0
Listing Saturday hours3
Mention washer work2

At the top of the Alliance list: Thompson Appliance Repair Inc (43.1 miles away, based in Scottsbluff, 4.5 stars from 29 reviews); Elite Appliance Repair (113.5 miles away, based in Cheyenne, 4.9 stars from 54 reviews, lists Saturday hours); Palmer Sales and Service (66.4 miles away, based in Sidney, 4.2 stars from 5 reviews, lists Saturday hours); Sears Appliance Repair (102.9 miles away, based in Sterling, 2.6 stars from 5 reviews, lists Saturday hours).

⚡ One call to a Maytag washer technician near you
☎(866) 293-4411

Maytag Washer Lines Technicians Work On

Pet Pro Front Load WasherA front load washer with a Pet Pro option and removable filter designed to lift and trap pet hair from clothing.
Top Load Agitator and Impeller WashersLarger-capacity top loaders sold with either a Power Agitator or a Power Impeller, plus Extra Power and Deep Fill options on many models.

What a Maytag Washer Technician Deals With

Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)

Top load HE models use auto-sensing, spinning slowly to estimate the load before adding water in stages, so the water level can look lower than owners expect. Source: Maytag Product Help - Auto Sensing in a Top Load HE Washer

Maytag Washer Symptoms and First Checks

What Maytag Washer Codes Mean

CodeWhat it means
F9E1Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code
F8E1Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code
F5E2Top load: the lid lock cannot engage, often because something is obstructing the lock area. Source: Maytag Product Help - F5E2 - Error Code

Maytag Washer Problems Worth a Service Call

  • Burning smell or a motor that hums without turning
  • Loud banging, shaking or walking during the spin
  • Grinding or roaring noise that rises with spin speed

How a Washer Service Call Usually Goes in Alliance

Door boot and leaksOn front loaders the rubber door boot can tear or hold water and debris. A technician follows any leak back to its source, which may be the boot, a hose clamp, the pump, the inlet valve or the tub.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Owner Care for Maytag Washers

Brand guides: Maytag Washer Not Draining or Spinning: Causes.

Maytag Washer Repair Cost Ranges

A Maytag washer repair usually costs about the same as any other brand for the same part. Published ranges:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What to Have Ready for a Maytag Washer Call

  • Any error code shown on the display
  • Where the washer drains (standpipe or laundry sink)
  • What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)

Around Alliance

Most washer calls in Alliance come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Nebraska does not license appliance repair technicians at the state level; contractors working on other people's property register with the Department of Labor, and trade licenses such as plumbing are handled by cities and villages. Source: Nebraska Department of Labor: Who Needs to Register

In Nebraska, you can check a license with the Nebraska Department of Labor contractor registration (Search Registered Contractors and Subcontractors) or report a problem to the Nebraska Attorney General, Consumer Protection Division.

Questions to Ask a Alliance Washer Technician

  • What guarantee do you give on parts and labor?
  • How often do you repair Maytag washers, and how quickly can you get parts?
  • Can you give a written estimate before ordering parts?

Maytag Washer Repair FAQs: Alliance, NE

Do you work for Maytag?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
Why does my Maytag washer show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged drain filter, a kinked hose or an unbalanced load. If the code returns, a technician can test the part the code points to.
Should I repair or replace my Maytag washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Lid switches, door locks, inlet valves, belts and drain pumps are modest repairs on a washer that is otherwise sound. Our repair-cost guide shows published ranges.
Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

Other Washer Repair in Alliance

More Maytag Washer Repair Pages Nearby

Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.

Get connected with a Maytag washer technician near Alliance
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech