Serving Stallings, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Stallings, NC

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Stallings.

Water sitting in the washer in Stallings?
Tell us the brand and the problem and we will connect you with a technician near Stallings.
☎(866) 293-4411
✓12 companies listed for Stallings✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. The Stallings list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Who Repairs Washers Near Stallings

40 repair companies serve Stallings from within 30 miles. The rest are spread across Matthews (12), Monroe (12), and Charlotte (8). The farthest listed company is about 11 miles out. Appliance Repair Technologies Indian Trail is the nearest, roughly 1.8 miles from Stallings. 10 list washing machine or washer work specifically. Rated companies nearby average 4.9 stars across 34 businesses.

Washer & Dryer Repair
Smartfix Appliance & Refrigerator Repair
7004 Sedgewick Rd, Indian Trail, NC 28079
3.6 mi from Stallings
★★★★★ 4.9 (438 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Urgent Appliance Repair
814 Circle Trace Rd, Monroe, NC 28110
7.6 mi from Stallings
★★★★★ 5.0 (159 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ProLine Appliance repair
12124 Bobhouse Dr, Charlotte, NC 28277
9.4 mi from Stallings
★★★★★ 5.0 (142 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Local Appliance Master
4401 Windjammer Dr, Monroe, NC 28110
3.1 mi from Stallings
★★★★★ 5.0 (105 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
CLT Appliance Repair
11334 Foxhaven Dr, Charlotte, NC 28277
9.8 mi from Stallings
★★★★★ 4.9 (532 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Prime Appliance Repair
4301 Emerald Ln, Indian Trail, NC 28079
2.7 mi from Stallings
★★★★★ 5.0 (70 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A One Appliance Repair & Plumbing Services
6135 Park S Dr #500, Charlotte, NC 28210
10.7 mi from Stallings
★★★★★ 5.0 (83 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
AlphaGood Appliance Repair
5619 Wyalong Dr, Charlotte, NC 28227
5.3 mi from Stallings
★★★★★ 5.0 (115 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Almaks Appliance Repair in Charlotte
10833 Monroe Rd Suit P031, Matthews, NC 28105
4.1 mi from Stallings
★★★★★ 4.9 (67 reviews)
Mentions washers
Washer & Dryer Repair
Just Call Appliance Repair
10643 Kettering Dr Unit 202, Charlotte, NC 28226
11.5 mi from Stallings
★★★★★ 5.0 (115 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2115 W Roosevelt Blvd #200, Monroe, NC 28110
9.2 mi from Stallings
★★★★½ 4.6 (133 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
FIXIT Appliance Repair
1005 Sunflower Ln, Indian Trail, NC 28079
3.9 mi from Stallings
★★★★★ 4.8 (22 reviews)
Mentions washers

Companies are shown by relevance and distance from Stallings. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Stallings repair companies in numbers
Mention washer work19
Listing Saturday hours44
Rated 4.5 stars or higher (10+ reviews)33
Three nearest companies, miles away1.8, 2.2, 2.4
Mention a major washer brand0
Companies within 30 miles60

The leading options for Stallings are Smartfix Appliance & Refrigerator Repair (3.6 miles away, based in Indian Trail, 4.9 stars from 438 reviews, lists Saturday hours); Urgent Appliance Repair (7.6 miles away, based in Monroe, 5.0 stars from 159 reviews, lists Saturday hours); ProLine Appliance repair (9.4 miles away, based in Charlotte, 5.0 stars from 142 reviews, lists Saturday hours); Local Appliance Master (3.1 miles away, based in Monroe, 5.0 stars from 105 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Grinding or roaring noise that rises with spin speed
  • An error code on the display
  • Burning smell or a motor that hums without turning
  • Water left in the drum after the cycle

What Usually Goes Wrong

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

Inside a Washer Repair Visit

Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not filling with water or front-load vs top-load washer problems.

Before Anyone Touches the Washer

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

More: where washer leaks come from.

What Washer Repair Costs in Stallings

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Stallings

Most washer calls in Stallings come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Questions to Ask a Stallings Washer Technician

  • Can you give a written estimate before ordering parts?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Stallings, NC

What should I check before calling?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Brand-Specific Washer Repair, Stallings

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Stallings technician a trip for parts.

Get connected with a washer technician near Stallings
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech