A Amana washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Stallings list starts with companies that name Amana, followed by other appliance repair companies that work on washers.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Amana. If your washer is still under manufacturer coverage, contact Amana directly.
Independent Amana Washer Technicians, Stallings NC
40 repair companies serve Stallings from within 30 miles. The rest are spread across Matthews (12), Monroe (12), and Charlotte (8). The farthest listed company is about 11 miles out. The closest is Appliance Repair Technologies Indian Trail, about 1.8 miles away. No company within 90 miles of Stallings mentions Amana by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 34 rated companies, the average public rating is 4.9 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 44 |
|---|---|
| Mention Amana | 0 |
| With 4.5+ stars and at least 10 reviews | 33 |
| Name washers or washing machines in their listing | 19 |
| Distance to the three closest (mi) | 1.8, 2.2, 2.4 |
| Appliance repair companies in range (30 mi) | 60 |
At the top of the Stallings list: Local Appliance Master (3.1 miles away, based in Monroe, 5.0 stars from 105 reviews, lists Saturday hours); Smartfix Appliance & Refrigerator Repair (3.6 miles away, based in Indian Trail, 4.9 stars from 438 reviews, lists Saturday hours); ProLine Appliance repair (9.4 miles away, based in Charlotte, 5.0 stars from 142 reviews, lists Saturday hours); CLT Appliance Repair (9.8 miles away, based in Charlotte, 4.9 stars from 532 reviews, lists Saturday hours).
Know Your Amana Washer
What Makes Amana Washer Repairs Different
A lid or door switch lets the washer run only when the lid is fully closed, so a bad switch can keep the washer from draining or spinning. Source: Amana - Washer Not Draining or Spinning? Troubleshooting Guide
Shipping bolts hold the drum during transport and must come out after installation, or the washer will vibrate and walk. Source: Amana - Washer is Vibrating, Walking or Moving
What Amana Says to Check First
- Too many suds. Amana says to use only HE detergent in the amount the detergent maker recommends for the load. Source: Amana - HE Detergent use in a Washer
- Lid won't lock or unlock. Amana says to clear anything caught under the lid and any detergent buildup around the lock, and to take items such as a laundry basket off the top of the washer. Source: Amana - Error Codes in Top Load HE Washers
Amana Washer Error Codes
| Code | What it means |
|---|---|
| Ofb | Top load: the load is unbalanced, and the washer will try to rebalance it on its own. Source: Amana - Error Codes in Top Load HE Washers |
| F7 E1 | Front load: motor speed sensing error, so check that the shipping bolts are out and the washer isn't overloaded. Source: Amana - Error Codes in Front Load Washers |
| lid | Top load: the lid is open, and if it stays open for more than 10 minutes the cycle resets and drains. Source: Amana - Error Codes in Top Load HE Washers |
Signs Your Amana Washer Needs a Technician
- Washer fills slowly, will not fill, or keeps filling
- Burning smell or a motor that hums without turning
- An error code on the display
What a Washing Machine Technician Checks
Owner Care for Amana Washers
- Use only HE detergent, dosed for the load size and soil level, because too much causes oversudsing, longer cycles and poor rinsing. Source: Amana - HE Detergent use in a Washer
- On front loaders with an accessible pump filter, clean the filter every few months or as needed. Source: Amana - Cleaning the Pump Filter - Front Load Washer
Amana Washer Repair Cost Ranges
A Amana washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Water level / pressure switch replacement: $100–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- Service call / diagnostic fee (often waived if you go ahead with the repair): $50–$100 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
What to Have Ready for a Amana Washer Call
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
- Where the washer drains (standpipe or laundry sink)
- How old the washer is
What Stallings Owners Should Know
Most washer calls in Stallings come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)
In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.
Questions to Ask a Stallings Washer Technician
- What guarantee do you give on parts and labor?
- Do you work on front-load and top-load washers, or only one type?
- Is your company licensed where my state requires it, and insured?
Amana Washer Repair FAQs: Stallings, NC
Why does my front-load washer smell?
Why does my Amana washer show an error code?
Which Stallings technicians work on Amana?
More Washing Machine Repair in Stallings, NC
Amana Washer Repair Near Stallings
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Amana repair.