Serving Hope Mills, North Carolina and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Hope Mills, NC

Washing machine repair from independent technicians serving Hope Mills, with ratings, distances and what to check before you call.

Water sitting in the washer in Hope Mills?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓12 companies listed for Hope Mills✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Hope Mills, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washing Machine Repair Companies Near Hope Mills

Our data shows 23 appliance repair companies inside a 30-mile radius of Hope Mills. 1 list an address in Hope Mills, and the rest are spread across Fayetteville (14), Lumberton (4), and Shannon (1). The farthest listed company is about 30 miles out. The closest is Hometown Appliance Repair, about 2.0 miles away. 5 list washing machine or washer work specifically. Rated companies nearby average 4.1 stars across 23 businesses.

Appliance Repair
Heating And Air Conditioning & Washer Fayetteville
5955 Cliffdale Rd, Fayetteville, NC 28314
6.3 mi from Hope Mills
★★★★½ 4.5 (6 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
419 Cross Creek Mall, Fayetteville, NC 28303
7.1 mi from Hope Mills
★★★★½ 4.5 (589 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair Fayetteville NC
1215 Deep Creek Rd, Fayetteville, NC 28312
7.1 mi from Hope Mills
★★★★½ 4.4 (14 reviews)
Mentions washers
Washer & Dryer Repair
Southeastern Appliance Repair southeasternappliancerepairs@gmail.com
Haonani Dr, Skibo Rd, Fayetteville, NC 28303
8.1 mi from Hope Mills
★★★★ 4.2 (85 reviews)
Mentions washers
Washer & Dryer Repair
Sears Appliance Repair
4329 Fayetteville Rd, Lumberton, NC 28358
22.0 mi from Hope Mills
★★★★½ 4.4 (110 reviews)
Mentions washersSaturday hours
Appliance Repair
Moore Appliance Service
2929 Breezewood Ave Ste 100A, Fayetteville, NC 28303
4.5 mi from Hope Mills
★★★★★ 4.9 (479 reviews)
Appliance Repair
Hometown Appliance Repair
109 Hay St Ste 202, Fayetteville, NC 28301
10.3 mi from Hope Mills
★★★★★ 4.9 (465 reviews)
Appliance Repair
Major Appliance Company
2800 Raeford Rd Ste 22, Fayetteville, NC 28303
5.7 mi from Hope Mills
★★★★½ 4.7 (252 reviews)
Saturday hours
Appliance Repair
Moore Appliance Service
265 Commerce Ave, Southern Pines, NC 28387
29.6 mi from Hope Mills
★★★★★ 4.9 (760 reviews)
Appliance Repair
Trinity Appliance Service
9293 Rennert Rd, Shannon, NC 28386
13.1 mi from Hope Mills
★★★★★ 4.9 (67 reviews)
Appliance Repair
The $20.00 Moving Truck Home Appliances
6109a Yadkin Rd, Fayetteville, NC 28303
9.2 mi from Hope Mills
★★★★½ 4.7 (76 reviews)
Saturday hours
Appliance Repair
Hometown Appliance Repair
4730 US-301, Hope Mills, NC 28348
2.0 mi from Hope Mills
★★★½ 3.4 (5 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Hope Mills
Distance to the three closest (mi)2.0, 4.5, 5.7
Repair companies inside 30 miles23
Rated 4.5 stars or higher (10+ reviews)8
Name washers or washing machines in their listing5
Listing Saturday hours13
Mention a major washer brand0

Closest matches for Hope Mills: Heating And Air Conditioning & Washer Fayetteville (6.3 miles away, based in Fayetteville, 4.5 stars from 6 reviews, lists Saturday hours); Sears Appliance Repair (7.1 miles away, based in Fayetteville, 4.5 stars from 589 reviews, lists Saturday hours); Appliance Repair Fayetteville NC (7.1 miles away, based in Fayetteville, 4.4 stars from 14 reviews); Southeastern Appliance Repair southeasternappliancerepairs@gmail.com (8.1 miles away, based in Fayetteville, 4.2 stars from 85 reviews).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

When to Call for Washer Repair

  • Burning smell or a motor that hums without turning
  • Washer will not start or the lid or door stays locked
  • Water on the floor under or in front of the washer
  • Loud banging, shaking or walking during the spin

What Usually Goes Wrong

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

Inside a Washer Repair Visit

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.

Troubleshooting first? Start with washer not filling with water or washer smells like mildew.

Leaks and Safe Shutoff

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Hope Mills, NC

Most washer calls in Hope Mills come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Before You Book in Hope Mills

  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Hope Mills, NC

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Brand-Specific Washer Repair, Hope Mills

More Washing Machine Repair Pages Nearby

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Hope Mills technician a trip for parts.

Get connected with a washer technician near Hope Mills
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech