Serving Miles City, Montana and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Miles City, MT

Washing machine repair from independent technicians serving Miles City, with ratings, distances and what to check before you call.

Washer down in Miles City?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓6 companies listed for Miles City✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. The Miles City list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washer Technicians Serving Miles City, MT

We found 6 appliance repair companies within 133 miles of Miles City. Other nearby bases include Sheridan (3), Glendive (1), and Sidney (1). 3 list washing machine or washer work specifically. The closest is Sears Appliance Repair, about 71.0 miles away. Because the nearest shops are farther out, ask each company whether Miles City is inside its regular service area.

Washer & Dryer Repair
Sears Appliance Repair
1515 W Bell St, Glendive, MT 59330
71.0 mi from Miles City
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2571 N Main St, Sheridan, WY 82801
121.7 mi from Miles City
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1467 Coffeen Ave, Sheridan, WY 82801
124.2 mi from Miles City
Mentions washersSaturday hours
Appliance Repair
A Plus Plumbers & Appliance Repair, LLC
1150 Broadway St, Sheridan, WY 82801
122.7 mi from Miles City
★★★★½ 4.4 (53 reviews)
Appliance Repair
Appliance Repair Billings MT
520 Wicks Ln Unit 10, Billings, MT 59105
132.4 mi from Miles City
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Marty’s Appliance Repair
1601 Sunflower Ln, Sidney, MT 59270
120.1 mi from Miles City
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Miles City repair companies in numbers
Listing Saturday hours5
With 4.5+ stars and at least 10 reviews0
Distance to the three closest (mi)71.0, 120.1, 121.7
Mention a major washer brand0
Name washers or washing machines in their listing3
Companies within 133 miles6

The leading options for Miles City are Sears Appliance Repair (71.0 miles away, based in Glendive, lists Saturday hours); Sears Appliance Repair (121.7 miles away, based in Sheridan, lists Saturday hours); Sears Appliance Repair (124.2 miles away, based in Sheridan, lists Saturday hours); A Plus Plumbers & Appliance Repair, LLC (122.7 miles away, based in Sheridan, 4.4 stars from 53 reviews).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Grinding or roaring noise that rises with spin speed
  • Washer will not spin, or clothes come out soaking wet
  • Loud banging, shaking or walking during the spin
  • Washer will not start or the lid or door stays locked

What Usually Goes Wrong

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

What Gets Fixed on a Miles City Washer Call

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or washer not spinning.

Water, Power and Safety First

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Miles City

Most washer calls in Miles City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Questions to Ask a Miles City Washer Technician

  • Do you work on front-load and top-load washers, or only one type?
  • If a part has to be ordered, how soon can you come back to finish?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Miles City, MT

Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.

Brand-Specific Washer Repair, Miles City

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Miles City faster and cheaper.

Get connected with a washer technician near Miles City
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech