Serving Columbia Falls, Montana and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Columbia Falls, MT

See which appliance repair companies around Columbia Falls work on washing machines, how far away they are and how customers rate them.

Talk to a washing machine tech near Columbia Falls
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓6 companies listed for Columbia Falls✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Who Repairs Washers Near Columbia Falls

We found 6 appliance repair companies within 60 miles of Columbia Falls. The rest are spread across Kalispell (5) and Polson (1). Of those, 2 mention washing machine or washer work by name. Nearest on the list: Montana Affordable Services, LLC., around 11.6 miles out. Across 5 rated companies, the average public rating is 4.2 stars. Columbia Falls is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Montana Affordable Services, LLC.
87 Winchester St, Kalispell, MT 59901
11.6 mi from Columbia Falls
★★★★★ 5.0 (371 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
214 1st St E, Polson, MT 59860
46.8 mi from Columbia Falls
Mentions washersSaturday hours
Appliance Repair
Bud Blocks Service & Appliances inc.
9 S Meridian Rd, Kalispell, MT 59901
13.7 mi from Columbia Falls
★★★★½ 4.5 (116 reviews)
Appliance Repair
Alg Service And Repair
19 Dale Dr, Kalispell, MT 59901
16.5 mi from Columbia Falls
★★★★ 3.9 (7 reviews)
Saturday hours
Appliance Repair
Sweet Tea Smarts Appliance Repair & Rentals
331 Harrison Blvd, Kalispell, MT 59901
11.9 mi from Columbia Falls
★★★½ 3.7 (3 reviews)
Saturday hours
Appliance Repair
Cates Appliance Sales & Repair
1011 E Idaho St, Kalispell, MT 59901
12.3 mi from Columbia Falls
★★★★ 4.0 (42 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Columbia Falls repair companies in numbers
Rated 4.5 stars or higher (10+ reviews)2
Open on Saturdays (per listing)5
Mention a major washer brand0
Companies within 60 miles6
Mention washer work2
Distance to the three closest (mi)11.6, 11.9, 12.3

The leading options for Columbia Falls are Montana Affordable Services, LLC. (11.6 miles away, based in Kalispell, 5.0 stars from 371 reviews, lists Saturday hours); Sears Appliance Repair (46.8 miles away, based in Polson, lists Saturday hours); Bud Blocks Service & Appliances inc. (13.7 miles away, based in Kalispell, 4.5 stars from 116 reviews); Alg Service And Repair (16.5 miles away, based in Kalispell, 3.9 stars from 7 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Columbia Falls
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Musty or mildew smell from the drum or door seal
  • Washer will not start or the lid or door stays locked
  • Water left in the drum after the cycle
  • Burning smell or a motor that hums without turning

What Usually Goes Wrong

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What Gets Fixed on a Columbia Falls Washer Call

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with washer not spinning or washer smells like mildew.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Unplug the washer before servicing or cleaning it; pressing the power button does not disconnect it from the electrical supply. Source: GE Appliances - Washer Owner's Manual

If a child swallows detergent from a packet, rinse out the mouth and call Poison Help immediately; for eye contact, flush with water for at least 15 minutes. Source: CPSC - CPSC and ACCC Warn of Poison Dangers with Liquid Laundry Packets

More: where washer leaks come from.

What Washer Repair Costs in Columbia Falls

Before replacing a washer in Columbia Falls, price the repair. Here is what published cost guides report for common jobs:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Columbia Falls Owners Should Know

Most washer calls in Columbia Falls come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Questions to Ask a Columbia Falls Washer Technician

  • If the washer is leaking, will you find where the water starts before quoting a part?
  • Can you give a written estimate before ordering parts?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Columbia Falls, MT

Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Find Your Washer Brand in Columbia Falls

Washing Machine Repair in Nearby Cities

Before you call a Columbia Falls technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech