Serving Anaconda, Montana and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Anaconda, MT

Washing machine repair from independent technicians serving Anaconda, with ratings, distances and what to check before you call.

Need washer repair in Anaconda?
Call our helpline to be connected with an independent washing machine technician near you.
☎(866) 293-4411
✓5 companies listed for Anaconda✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Anaconda, sorted by how closely they match washing machine work, then by distance and public ratings.

Washer Technicians Serving Anaconda, MT

5 repair companies serve Anaconda from within 60 miles. Other nearby bases include Butte (2), Hamilton (2), and Corvallis (1). Of those, 2 mention washing machine or washer work by name. Nearest on the list: Bowman Appliance Repair, around 25.5 miles out. Across 3 rated companies, the average public rating is 4.7 stars. Anaconda is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
3300 Harrison Ave, Butte, MT 59701
27.6 mi from Anaconda
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1235 N 1st St, Hamilton, MT 59840
54.0 mi from Anaconda
Mentions washersSaturday hours
Appliance Repair
Bowman Appliance Repair
208 W Park St, Butte, MT 59701
25.5 mi from Anaconda
★★★★½ 4.3 (62 reviews)
Appliance Repair
Johnson Appliance Service
142 Cyn Fls Wy, Hamilton, MT 59840
54.0 mi from Anaconda
★★★★½ 4.7 (81 reviews)
Saturday hours
Appliance Repair
406 Appliance Repair
1718 Eastside Hwy, Corvallis, MT 59828
53.8 mi from Anaconda
★★★★★ 5.0 (143 reviews)

Companies are shown by relevance and distance from Anaconda. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Anaconda
Name washers or washing machines in their listing2
Listing Saturday hours3
Mention a major washer brand0
Appliance repair companies in range (60 mi)5
Distance to the three closest (mi)25.5, 27.6, 53.8
Rated 4.5 stars or higher (10+ reviews)2

The leading options for Anaconda are Sears Appliance Repair (27.6 miles away, based in Butte, lists Saturday hours); Sears Appliance Repair (54.0 miles away, based in Hamilton, lists Saturday hours); Bowman Appliance Repair (25.5 miles away, based in Butte, 4.3 stars from 62 reviews); Johnson Appliance Service (54.0 miles away, based in Hamilton, 4.7 stars from 81 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Water on the floor under or in front of the washer
  • Grinding or roaring noise that rises with spin speed
  • An error code on the display
  • Musty or mildew smell from the drum or door seal

The Usual Washer Culprits in Anaconda

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Anaconda

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.
Water inlet valve and hosesAn electric valve meters hot and cold water in. A technician checks its inlet screens for sediment and tests its coils when the washer fills slowly, will not fill, or will not stop filling.

Troubleshooting first? Start with washer not draining or washer not spinning.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Do not make an airtight seal between the drain hose and the standpipe or restrict the hose; standpipe height limits vary by model (Maytag's high-efficiency guide allows 18 to 96 inches). Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

What Washer Repair Costs in Anaconda

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Anaconda, MT

Most washer calls in Anaconda come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

How to Choose a Washing Machine Technician Near Anaconda

  • What guarantee do you give on parts and labor?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • If the washer is leaking, will you find where the water starts before quoting a part?

Washing Machine Repair FAQs: Anaconda, MT

Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
How much does washing machine repair cost in Anaconda?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.

Find Your Washer Brand in Anaconda

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Anaconda faster and cheaper.

Get connected with a washer technician near Anaconda
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech