Serving Bemidji, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Bemidji, MN

See which appliance repair companies around Bemidji work on washing machines, how far away they are and how customers rate them.

Water sitting in the washer in Bemidji?
Tell us the brand and the problem and we will connect you with a technician near Bemidji.
☎(866) 293-4411
✓6 companies listed for Bemidji✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. This page lists independent appliance repair companies serving Bemidji and the Beltrami County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Bemidji, MN

Our data shows 6 appliance repair companies inside a 76-mile radius of Bemidji. 2 list an address in Bemidji, and the rest are spread across Thief River Falls (2), Park Rapids (1), and Grand Rapids (1). Distances run up to about 75 miles. The closest is MJB Home Center, about 0.7 miles away. 3 of them mention washing machine or washer work in their listing or website. The 6 rated companies in range average 3.8 stars. Because the nearest shops are farther out, ask each company whether Bemidji is inside its regular service area.

Appliance Repair
MJB Home Center
418 Beltrami Ave NW, Bemidji, MN 56601
0.7 mi from Bemidji
★★★★½ 4.5 (45 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1239 S Pokegama Ave, Grand Rapids, MN 55744
65.8 mi from Bemidji
★★★½ 3.7 (6 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1547 US-59, Thief River Falls, MN 56701
73.6 mi from Bemidji
★ 1.0 (1 review)
Mentions washersSaturday hours
Appliance Repair
Home Repair Professionals
2722 Paul Bunyan Dr NW, Bemidji, MN 56601
2.0 mi from Bemidji
★★★★★ 5.0 (1 review)
Appliance Repair
Gapp Appliance Service
22954 County 7, Park Rapids, MN 56470
34.0 mi from Bemidji
★★★★½ 4.7 (15 reviews)
Appliance Repair
Rick's Appliance.
1029 6th St W, Thief River Falls, MN 56701
75.4 mi from Bemidji
★★★½ 3.6 (8 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Bemidji repair companies in numbers
Repair companies inside 76 miles6
Three nearest companies, miles away0.7, 2.0, 34.0
With 4.5+ stars and at least 10 reviews2
Listing Saturday hours4
Mention washer work3
Mention a major washer brand0

The leading options for Bemidji are MJB Home Center (0.7 miles away, 4.5 stars from 45 reviews, lists Saturday hours); Sears Appliance Repair (65.8 miles away, based in Grand Rapids, 3.7 stars from 6 reviews, lists Saturday hours); Sears Appliance Repair (73.6 miles away, based in Thief River Falls, 1.0 stars from 1 reviews, lists Saturday hours); Home Repair Professionals (2.0 miles away, 5.0 stars from 1 reviews).

⚡ Skip the calling around: we will find a washer tech for you
☎(866) 293-4411

When to Call for Washer Repair

  • Musty or mildew smell from the drum or door seal
  • Loud banging, shaking or walking during the spin
  • Burning smell or a motor that hums without turning
  • Washer fills slowly, will not fill, or keeps filling

Why Washing Machines Break Down

Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

Inside a Washer Repair Visit

Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.

Troubleshooting first? Start with washer not spinning or front-load vs top-load washer problems.

Leaks and Safe Shutoff

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Bemidji, price the repair. Here is what published cost guides report for common jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What Bemidji Owners Should Know

Most washer calls in Bemidji come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Before You Book in Bemidji

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What guarantee do you give on parts and labor?
  • Can you give a written estimate before ordering parts?

Washing Machine Repair FAQs: Bemidji, MN

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.

Find Your Washer Brand in Bemidji

Washing Machine Repair Near Bemidji

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Bemidji technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech