Serving Baxter, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Baxter, MN

A local list of washer repair companies near Baxter, MN, sorted by how closely they match the work, then by distance and public ratings.

Washer down in Baxter?
Tell us the brand and the problem and we will connect you with a technician near Baxter.
☎(866) 293-4411
✓12 companies listed for Baxter✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. Below are the companies within reach of Baxter, sorted by how closely they match washing machine work, then by distance and public ratings.

Local Washing Machine Repair in Baxter, MN

Our data shows 15 appliance repair companies inside a 60-mile radius of Baxter. 1 of them are based in Baxter itself, and other nearby bases include St Cloud (5), Brainerd (4), and Sauk Rapids (2). Distances run up to about 56 miles. Nearest on the list: Sears Appliance Repair, around 3.0 miles out. 3 list washing machine or washer work specifically. Across 15 rated companies, the average public rating is 4.6 stars. Baxter is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
15910 Edgewood Dr N, Baxter, MN 56401
3.0 mi from Baxter
★★★★ 3.9 (24 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Omega Force Appliance Repair
2233 Roosevelt Rd Ste 2, St Cloud, MN 56301
56.1 mi from Baxter
★★★★★ 4.8 (199 reviews)
Mentions washersSaturday hours
Appliance Repair
Kern's Appliance Repair
11039 Greenwood St, Brainerd, MN 56401
3.7 mi from Baxter
★★★★½ 4.6 (55 reviews)
Washer & Dryer Repair
Sears Appliance Repair
4101 W Division St, St Cloud, MN 56301
54.4 mi from Baxter
★★★★½ 4.4 (86 reviews)
Mentions washersSaturday hours
Appliance Repair
YDE's Major Appliance Service
1220 Oak St, Brainerd, MN 56401
4.3 mi from Baxter
★★★★½ 4.5 (99 reviews)
Saturday hours
Appliance Repair
Batteries Plus Phone Repair
923 Washington St, Brainerd, MN 56401
4.2 mi from Baxter
★★★★½ 4.5 (33 reviews)
Saturday hours
Appliance Repair
218 Mechanical LLC
17371 Smith Rd, Brainerd, MN 56401
5.9 mi from Baxter
★★★★★ 5.0 (33 reviews)
Appliance Repair
A-1 Appliance & Refrigeration.
21452 130th Ave, Little Falls, MN 56345
19.5 mi from Baxter
★★★★★ 4.8 (16 reviews)
Saturday hours
Appliance Repair
LAMMERS APPLIANCE REPAIR LLC
40282 344th St, Aitkin, MN 56431
30.3 mi from Baxter
★★★★½ 4.7 (12 reviews)
Appliance Repair
General Repair LLC
730 McKinley Pl S, St Cloud, MN 56301
54.9 mi from Baxter
★★★★★ 4.8 (90 reviews)
Appliance Repair
Appliance Repair Center Inc
1807 3rd St N, St Cloud, MN 56303
54.4 mi from Baxter
★★★★½ 4.6 (17 reviews)
Saturday hours
Appliance Repair
Gapp Appliance Service
22954 County 7, Park Rapids, MN 56470
54.6 mi from Baxter
★★★★½ 4.7 (15 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Baxter repair companies in numbers
Repair companies inside 60 miles15
Open on Saturdays (per listing)8
Name washers or washing machines in their listing3
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)10
Distance to the three closest (mi)3.0, 3.7, 4.2

Closest matches for Baxter: Sears Appliance Repair (3.0 miles away, 3.9 stars from 24 reviews, lists Saturday hours); Omega Force Appliance Repair (56.1 miles away, based in St Cloud, 4.8 stars from 199 reviews, lists Saturday hours); Kern's Appliance Repair (3.7 miles away, based in Brainerd, 4.6 stars from 55 reviews); Sears Appliance Repair (54.4 miles away, based in St Cloud, 4.4 stars from 86 reviews, lists Saturday hours).

⚡ Get connected with a washer technician near Baxter
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Grinding or roaring noise that rises with spin speed
  • Washer fills slowly, will not fill, or keeps filling
  • Loud banging, shaking or walking during the spin
  • Musty or mildew smell from the drum or door seal

What Usually Goes Wrong

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.

Inside a Washer Repair Visit

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not draining or washer smells like mildew.

Before Anyone Touches the Washer

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

What Washer Repair Costs in Baxter

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Baxter, MN

Most washer calls in Baxter come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Before You Book in Baxter

  • If a part has to be ordered, how soon can you come back to finish?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Is your company licensed where my state requires it, and insured?

Washing Machine Repair FAQs: Baxter, MN

Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Baxter

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Baxter technician a trip for parts.

Tell us what your washer is doing and we will connect you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech