Serving Ironwood, Michigan and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Ironwood, MI

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Ironwood.

Water sitting in the washer in Ironwood?
Tell us the brand and the problem and we will connect you with a technician near Ironwood.
☎(866) 293-4411
✓6 companies listed for Ironwood✓Independent, not a manufacturer✓Public ratings & distances

A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. The Ironwood list below starts with companies that show washer work in their listings, followed by other appliance repair companies nearby.

Washing Machine Repair Companies Near Ironwood

6 repair companies serve Ironwood from within 68 miles. The rest are spread across Rhinelander (2), Mercer (1), and Ashland (1). The farthest listed company is about 67 miles out. 2 list washing machine or washer work specifically. Nearest on the list: Rick"s Appliance Service LLC, around 18.6 miles out. Across 6 rated companies, the average public rating is 4.6 stars. Ironwood is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
908 Lincoln St, Rhinelander, WI 54501
67.1 mi from Ironwood
★★★★½ 4.6 (25 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Bartell Appliance Services
28 N Brown St, Rhinelander, WI 54501
66.5 mi from Ironwood
★★★★★ 5.0 (2 reviews)
Mentions washers
Appliance Repair
Rick"s Appliance Service LLC
2720W Great Northern Trail, Mercer, WI 54547
18.6 mi from Ironwood
★★★★★ 5.0 (7 reviews)
Appliance Repair
Denny's Appliance Service.
1626 Birchwood Dr, St Germain, WI 54558
50.2 mi from Ironwood
★★★★★ 4.8 (21 reviews)
Saturday hours
Appliance Repair
Residential Expertise
217 11th Ave W, Ashland, WI 54806
36.6 mi from Ironwood
★★★ 3.0 (4 reviews)
Appliance Repair
Northwest Appliance Repair
11570N N Gouch Circle Rd, Hayward, WI 54843
67.4 mi from Ironwood
★★★★★ 5.0 (20 reviews)

Companies are shown by relevance and distance from Ironwood. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Repair market snapshot: Ironwood, MI
Name washers or washing machines in their listing2
Three nearest companies, miles away18.6, 36.6, 50.2
Open on Saturdays (per listing)2
Rated 4.5 stars or higher (10+ reviews)3
Mention a major washer brand0
Appliance repair companies in range (68 mi)6

Closest matches for Ironwood: Sears Appliance Repair (67.1 miles away, based in Rhinelander, 4.6 stars from 25 reviews, lists Saturday hours); Bartell Appliance Services (66.5 miles away, based in Rhinelander, 5.0 stars from 2 reviews); Rick"s Appliance Service LLC (18.6 miles away, based in Mercer, 5.0 stars from 7 reviews); Denny's Appliance Service. (50.2 miles away, based in St Germain, 4.8 stars from 21 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Washer Problems Worth a Service Call

  • An error code on the display
  • Loud banging, shaking or walking during the spin
  • Water left in the drum after the cycle
  • Grinding or roaring noise that rises with spin speed

The Usual Washer Culprits in Ironwood

Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

What Gets Fixed on a Ironwood Washer Call

Controls and error codesElectronic washers report faults with codes. The technician reads the code and runs the brand's test mode where there is one, then checks wiring and the control board before ordering it, since boards are among the costlier parts.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Drive belt, coupler and motorBelt-drive washers turn the drum with a belt; others use a motor coupling or a direct-drive motor bolted to the tub. A hum with no movement, a burning smell or a drum that turns by hand too easily points here.

Troubleshooting first? Start with washer not draining or washer smells like mildew.

Water, Power and Safety First

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Ironwood

Most washer calls in Ironwood come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

Hiring a Washer Repair Company in Ironwood

  • Can you give a written estimate before ordering parts?
  • Do you work on front-load and top-load washers, or only one type?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Ironwood, MI

What does a washer repair usually cost?
Most companies charge a service call or diagnostic fee that is often applied to the repair if you go ahead. Common jobs such as a lid switch, inlet valve, drain pump or drive belt are usually worth fixing on a washer that is otherwise sound. Our washing machine repair cost guide lists published ranges.
Are you affiliated with any washer brand?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your washer is still under manufacturer coverage, contact the brand first.
Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.

Brand-Specific Washer Repair, Ironwood

Washing Machine Repair in Nearby Cities

Before you call a Ironwood technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Ironwood
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech