Serving Hermantown, Minnesota and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Hermantown, MN

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Hermantown.

Washer down in Hermantown?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓10 companies listed for Hermantown✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washer Technicians Serving Hermantown, MN

10 repair companies serve Hermantown from within 60 miles. The rest are spread across Duluth (3), Superior (2), and Esko (1). The farthest listed company is about 53 miles out. Of those, 1 mentions washing machine or washer work by name. The closest is Sears Appliance Repair, about 3.9 miles away. The 7 rated companies in range average 4.3 stars. Hermantown is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
1600 Miller Trunk Hwy, Duluth, MN 55811
3.9 mi from Hermantown
★★★★ 4.1 (72 reviews)
Mentions washersSaturday hours
Appliance Repair
Better Service Duluth Inc
304 Compo Ln, Esko, MN 55733
6.6 mi from Hermantown
★★★★★ 4.9 (55 reviews)
Appliance Repair
Johnson Appliance Service
1415 Belknap St, Superior, WI 54880
8.9 mi from Hermantown
★★ 1.9 (84 reviews)
Saturday hours
Appliance Repair
Jordan Repair Service
312 N Central Ave, Duluth, MN 55807
5.9 mi from Hermantown
Appliance Repair
Northern Star Food Equipment
2700 Tall Pine Ln, Cloquet, MN 55720
11.6 mi from Hermantown
★★★★★ 5.0 (1 review)
Appliance Repair
On-Target Appliance Repair
125 W Superior St, Duluth, MN 55802
6.8 mi from Hermantown
Appliance Repair
RAINBOW SERVICES
4650 Rivord Rd, Superior, WI 54880
17.1 mi from Hermantown
★★★★ 4.1 (14 reviews)
Appliance Repair
Big River Appliance Repair, LLC
69377 MN-65, Jacobson, MN 55752
50.0 mi from Hermantown
★★★★★ 5.0 (6 reviews)
Appliance Repair
Bud's Appliance Repair
3001 4th Ave E, Hibbing, MN 55746
53.4 mi from Hermantown
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Range Repair Service
108 S 15th Ave W, Virginia, MN 55792
51.7 mi from Hermantown

Companies are shown by relevance and distance from Hermantown. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Hermantown repair companies in numbers
With 4.5+ stars and at least 10 reviews1
Appliance repair companies in range (60 mi)10
Listing Saturday hours3
Mention a major washer brand0
Distance to the three closest (mi)3.9, 5.9, 6.6
Mention washer work1

The leading options for Hermantown are Sears Appliance Repair (3.9 miles away, based in Duluth, 4.1 stars from 72 reviews, lists Saturday hours); Better Service Duluth Inc (6.6 miles away, based in Esko, 4.9 stars from 55 reviews); Johnson Appliance Service (8.9 miles away, based in Superior, 1.9 stars from 84 reviews, lists Saturday hours); Jordan Repair Service (5.9 miles away, based in Duluth).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Washer will not start or the lid or door stays locked
  • Washer will not spin, or clothes come out soaking wet
  • Washer fills slowly, will not fill, or keeps filling
  • Burning smell or a motor that hums without turning

Why Washing Machines Break Down

Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.

What Gets Fixed on a Hermantown Washer Call

Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.
Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with washer not draining or front-load vs top-load washer problems.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Manufacturers require the washer to be electrically grounded and warn against using an extension cord or modifying the plug. Source: Maytag - High-Efficiency Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

Before replacing a washer in Hermantown, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Hermantown

Most washer calls in Hermantown come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Before You Book in Hermantown

  • Is your company licensed where my state requires it, and insured?
  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Hermantown, MN

Is my washing machine worth fixing?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.
Why does my washer shake or walk across the floor?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Washer Repair by Brand in Hermantown

Washing Machine Repair in Nearby Cities

Write down the model and serial number from the label (inside the lid or door frame, or on the back of the cabinet) and note any error code. It saves a Hermantown technician a trip for parts.

Get connected with a washer technician near Hermantown
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech