Serving Hillsdale, Michigan and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Hillsdale, MI

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Hillsdale.

Washer down in Hillsdale?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Hillsdale✓Independent, not a manufacturer✓Public ratings & distances

When a washer quits in Hillsdale, the first question is whether it is a clog or a setting you can clear yourself or a failed part, and that decides whether you need a technician at all. This page lists independent appliance repair companies serving Hillsdale and the Hillsdale County area, with companies that mention washer work shown first.

Local Washing Machine Repair in Hillsdale, MI

Within 60 miles of Hillsdale there are 40 appliance repair companies in our data. The rest are spread across Ann Arbor (5), Battle Creek (4), and Jackson (2). 15 list washing machine or washer work specifically. Sears Appliance Repair is the nearest, roughly 17.3 miles from Hillsdale. Across 38 rated companies, the average public rating is 4.3 stars. Hillsdale is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Washer & Dryer Repair
Sears Appliance Repair
352 S Willowbrook Rd, Coldwater, MI 49036
17.3 mi from Hillsdale
★★★★ 4.1 (61 reviews)
Mentions LG, Samsung, WhirlpoolMentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1250 Jackson Crossing # I-94, Jackson, MI 49202
25.9 mi from Hillsdale
★★★★ 4.2 (108 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Allens Appliance Repair
5420A Beckley Rd #111, Battle Creek, MI 49015
36.6 mi from Hillsdale
★★★★★ 4.9 (72 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Dave Smith Appliance Services LLC
2150 N Reynolds Rd, Toledo, OH 43615
53.1 mi from Hillsdale
★★★★★ 4.8 (1,168 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
5575 Beckley Rd, Battle Creek, MI 49015
36.6 mi from Hillsdale
★★★★½ 4.5 (281 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Mr. Appliance of Perrysburg
2620 Centennial Rd Ste P, Sylvania, OH 43617
49.5 mi from Hillsdale
★★★★½ 4.5 (251 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sauder's TV & Appliance Inc Sales & Service
105 S Defiance St, Archbold, OH 43502
32.8 mi from Hillsdale
★★★★★ 4.9 (27 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1429 W High St, Bryan, OH 43506
31.4 mi from Hillsdale
★★★★½ 4.3 (83 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
15861 W Michigan Ave, Marshall, MI 49068
29.9 mi from Hillsdale
★★★★ 4.2 (60 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
900 Briarwood Cir, Ann Arbor, MI 48108
50.6 mi from Hillsdale
★★★★½ 4.5 (287 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1221 N Wayne St, Angola, IN 46703
26.8 mi from Hillsdale
★★★½ 3.7 (40 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1016 W Seventh St, Auburn, IN 46706
44.7 mi from Hillsdale
★★★★½ 4.3 (38 reviews)
Mentions washersSaturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Hillsdale
Distance to the three closest (mi)17.3, 20.3, 22.9
Mention a major washer brand1
Appliance repair companies in range (60 mi)57
Mention washer work19
Open on Saturdays (per listing)42
Rated 4.5 stars or higher (10+ reviews)24

The leading options for Hillsdale are Sears Appliance Repair (17.3 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Sears Appliance Repair (25.9 miles away, based in Jackson, 4.2 stars from 108 reviews, lists Saturday hours); Allens Appliance Repair (36.6 miles away, based in Battle Creek, 4.9 stars from 72 reviews, lists Saturday hours); Dave Smith Appliance Services LLC (53.1 miles away, based in Toledo, 4.8 stars from 1,168 reviews, lists Saturday hours).

⚡ One call to reach a local washing machine repair company
☎(866) 293-4411

Signs Your Washing Machine Needs a Technician

  • Burning smell or a motor that hums without turning
  • Musty or mildew smell from the drum or door seal
  • Washer will not spin, or clothes come out soaking wet
  • Water left in the drum after the cycle

What Usually Goes Wrong

Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.

How a Washer Service Call Usually Goes in Hillsdale

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer smells like mildew or front-load vs top-load washer problems.

If Your Washer Is Leaking

Turn off the water supply valves before disconnecting or reconnecting the washer's fill hoses. Source: Electrolux - Front loading washer Error Code HO SE reversed hose detection

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Repair or Replace Your Washer?

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Hillsdale

Most washer calls in Hillsdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

Questions to Ask a Hillsdale Washer Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Do you work on front-load and top-load washers, or only one type?

Washing Machine Repair FAQs: Hillsdale, MI

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Is there anything I can try first?
Make sure the washer is plugged in and the outlet works, the lid or door closes fully, and both water valves are open. If the washer is leaking, unplug it and turn off both supply valves before doing anything else.
Why is there water left in my washer?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Find Your Washer Brand in Hillsdale

More Washing Machine Repair Pages Nearby

Before you call a Hillsdale technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Get connected with a washer technician near Hillsdale
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech