A Maytag washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. The Hillsdale list starts with companies that name Maytag, followed by other appliance repair companies that work on washers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Washers Near Hillsdale
Our data shows 40 appliance repair companies inside a 60-mile radius of Hillsdale. Other nearby bases include Ann Arbor (5), Battle Creek (4), and Jackson (2). The farthest listed company is about 54 miles out. The closest is Sears Appliance Repair, about 17.3 miles away. No company within 60 miles of Hillsdale names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 38 rated companies in range average 4.3 stars. Because the nearest shops are farther out, ask each company whether Hillsdale is inside its regular service area.
Companies are shown by relevance and distance from Hillsdale. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Mention Maytag | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 24 |
| Three nearest companies, miles away | 17.3, 20.3, 22.9 |
| Companies within 60 miles | 57 |
| Mention washer work | 19 |
| Listing Saturday hours | 42 |
The leading options for Hillsdale are A Dependable Maytag Home Appliance (86.8 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Sears Appliance Repair (17.3 miles away, based in Coldwater, 4.1 stars from 61 reviews, lists Saturday hours); Sears Appliance Repair (36.6 miles away, based in Battle Creek, 4.5 stars from 281 reviews, lists Saturday hours); Dave Smith Appliance Services LLC (53.1 miles away, based in Toledo, 4.8 stars from 1,168 reviews, lists Saturday hours).
Maytag sells top-load agitator, top-load impeller, and front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Maytag Washer Lines and Features
What a Maytag Washer Technician Deals With
Maytag top loaders move clothes with either an agitator or an impeller, and the drive shifts between agitation and full spin, which can make a normal clunking sound. Source: Maytag - How to repair a washing machine (top load)
A liquid-filled balance ring at the top of the tub shifts to offset uneven loads so the basket stays steady at higher spin speeds. Source: Maytag Product Help - Water Heard in Washer, but not Seen - Balance Ring Information
What Maytag Says to Check First
- Lid or door won't lock. For lid or door lock codes, Maytag says to check for clothing or objects blocking the latch area and then reset the washer by unplugging it for five minutes. Source: Maytag Product Help - F5E2 - Error Code (top load)
- Washer not draining or not spinning. Maytag says to confirm the lid or door is fully shut and the load is balanced, then check for oversudsing, a kinked or clogged drain hose, standpipe height and, on some front loaders, a clogged drain pump filter. Source: Maytag Product Help - Washer Not Draining or Spinning? Troubleshooting Guide
Reading a Maytag Washer Error Code
| Code | What it means |
|---|---|
| F5 E2 (front load) | Front load: the door is not locking properly; make sure it is fully latched and nothing is caught in it. Source: Maytag Product Help - F5 E2 - Error Code (front load) |
| F8E1 | Top load: the washer is not detecting the right amount of incoming water. Source: Maytag Product Help - F8E1 - Error Code |
| F9E1 | Top load: long drain, usually tied to a kinked, clogged or improperly installed drain hose. Source: Maytag Product Help - F9E1 - Error Code |
Maytag Washer Problems Worth a Service Call
- Washer fills slowly, will not fill, or keeps filling
- Water on the floor under or in front of the washer
- Washer will not spin, or clothes come out soaking wet
Inside a Washer Repair Visit
Care Maytag Recommends for Its Washers
- Use only HE detergent in HE washers and measure it per the detergent maker's directions, since too much causes oversudsing, poor rinsing and residue. Source: Maytag Product Help - HE Detergent use in a Washer
- Clean the front load drain pump filter every few months or as needed to clear lint and debris; check the owner's manual for its location on your model. Source: Maytag Product Help - Cleaning the Pump Filter - Front Load Washer
Brand guides: Maytag Washer Not Draining or Spinning: Causes.
Budgeting for a Maytag Washer Repair
Most Maytag washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Drive belt replacement: $120–$175 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- Typical washing machine repair: $125–$450 Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Getting Ready for the Repair
- How old the washer is
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Around Hillsdale
Most washer calls in Hillsdale come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Questions to Ask a Hillsdale Washer Technician
- If the washer is leaking, will you find where the water starts before quoting a part?
- What is the service call or diagnostic fee, and is it applied to the repair?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Washer Repair FAQs: Hillsdale, MI
Why does my front-load washer smell?
Where is the water under my washer coming from?
Should I repair or replace my Maytag washer?
Other Washer Repair in Hillsdale
More Maytag Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.