A washer that stops mid-cycle with a drum full of water turns a normal laundry day into a mess of wet towels and trips to the laundromat. This page lists independent appliance repair companies serving Bloomington and the McLean County area, with companies that mention washer work shown first.
Washer Technicians Serving Bloomington, IL
We found 20 appliance repair companies within 30 miles of Bloomington. 13 list an address in Bloomington, and other nearby bases include Normal (2), Clinton (2), and Carlock (1). Nearest on the list: UltraNest Appliance Repair Group, around 0.4 miles out. 4 list washing machine or washer work specifically. Rated companies nearby average 4.5 stars across 17 businesses.
Companies are shown by relevance and distance from Bloomington. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.
| Distance to the three closest (mi) | 0.4, 0.6, 1.0 |
|---|---|
| Repair companies inside 30 miles | 20 |
| Listing Saturday hours | 11 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Mention a major washer brand | 0 |
| Mention washer work | 4 |
Closest matches for Bloomington: Mr. Appliance of Bloomington (0.6 miles away, 4.7 stars from 733 reviews, lists Saturday hours); Sears Appliance Repair (1.1 miles away, 4.6 stars from 164 reviews, lists Saturday hours); OK Appliance (1.7 miles away, 4.1 stars from 37 reviews); Chambers Services (2.0 miles away, 4.8 stars from 1,926 reviews).
When to Call for Washer Repair
- An error code on the display
- Burning smell or a motor that hums without turning
- Water left in the drum after the cycle
- Musty or mildew smell from the drum or door seal
The Usual Washer Culprits in Bloomington
How a Washer Service Call Usually Goes in Bloomington
Troubleshooting first? Start with washer not spinning or washer not filling with water.
Water, Power and Safety First
Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses
Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions
To prevent siphoning, Whirlpool's instructions limit the drain hose to no more than 8 inches inside a standpipe that is at least 2 inches across and 39 to 96 inches tall, measured from the bottom of the washer. Source: Whirlpool - Washer Installation Instructions
More: where washer leaks come from.
Repair or Replace Your Washer?
Most washing machine repairs come down to one part and an hour or two of labor, which is why many are worth pricing before you shop for a new washer. Published ranges:
- Shock absorber replacement: $150–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Water inlet valve replacement: $95–$190 Source: Fixr - How much does it cost to repair a washing machine?
- Control board (motherboard) replacement: $250–$400 Source: Fixr - How much does it cost to repair a washing machine?
- Appliance technician labor: $50–$150 per hour Source: Fixr - How much does it cost to repair a washing machine?
50% rule: if the repair would cost more than half the price of a comparable new washer, replacing it is usually the better buy. Source: Fixr - How much does it cost to repair a washing machine?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Local Notes for Bloomington
Most washer calls in Bloomington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Questions to Ask a Bloomington Washer Technician
- Can you give a written estimate before ordering parts?
- If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
- If the washer is leaking, will you find where the water starts before quoting a part?
Washing Machine Repair FAQs: Bloomington, IL
Why does my front-load washer smell?
Why is there water left in my washer?
Do you cover Bloomington and nearby towns?
Find Your Washer Brand in Bloomington
More Washing Machine Repair Pages Nearby
Before you call a Bloomington technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.