A Electrolux washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Washing Machine Repair Near Me is not affiliated with or endorsed by Electrolux. If your washer is still under manufacturer coverage, contact Electrolux directly.
Independent Electrolux Washer Technicians, Bloomington IL
20 repair companies serve Bloomington from within 30 miles. 13 of them are based in Bloomington itself, and the rest are spread across Normal (2), Clinton (2), and Carlock (1). No company within 90 miles of Bloomington mentions Electrolux by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is UltraNest Appliance Repair Group, about 0.4 miles away. Rated companies nearby average 4.5 stars across 17 businesses.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Name washers or washing machines in their listing | 4 |
|---|---|
| Appliance repair companies in range (30 mi) | 20 |
| Mention Electrolux | 0 |
| Rated 4.5 stars or higher (10+ reviews) | 6 |
| Listing Saturday hours | 11 |
| Three nearest companies, miles away | 0.4, 0.6, 1.0 |
The leading options for Bloomington are Mr. Appliance of Bloomington (0.6 miles away, 4.7 stars from 733 reviews, lists Saturday hours); Sears Appliance Repair (1.1 miles away, 4.6 stars from 164 reviews, lists Saturday hours); Chambers Services (2.0 miles away, 4.8 stars from 1,926 reviews); OK Appliance (1.7 miles away, 4.1 stars from 37 reviews).
Electrolux sells front-load washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.
Electrolux Washer Lines Technicians Work On
How Electrolux Washers Are Built
Supply pressure is specified at 30 to 120 psi with no more than about 10 psi difference between hot and cold, and the inlet connectors carry filters that can clog. Source: Electrolux - Laundry Water Supply Guide
The control board watches a door switch and a door lock: E41 means it reads the door as open, while E42 means the lock itself is not being recognized, so a tech checks the latch, striker and lock assembly. Source: Electrolux - Front loading washer Error Code E42 door lock device failure
Common Electrolux Washer Problems
- Controls won't respond. A LOC display means the control lock is on; turn it off from the control lock option before starting a cycle. Source: Electrolux - Front loading washer Error Code LOC control lock activator
- Shaking, thumping or off balance. Confirm shipping bolts and foam were removed, level the washer on a solid floor, and redistribute or add a couple of similar items to an unbalanced load. Source: Electrolux - Laundry Washers Noises Guide
Electrolux Washer Error Codes
| Code | What it means |
|---|---|
| E35 | The pressure sensor detects a water overfill. Source: Electrolux - Front loading washer Error Code E35 pressure sensor indicates water overfill |
| E42 | The door lock is not being recognized. Source: Electrolux - Front loading washer Error Code E42 door lock device failure |
| LOC | The control lock is on, so cycles cannot be started until it is turned off. Source: Electrolux - Front loading washer Error Code LOC control lock activator |
Signs Your Electrolux Washer Needs a Technician
- Loud banging, shaking or walking during the spin
- Washer will not start or the lid or door stays locked
- Water left in the drum after the cycle
What Gets Fixed on a Bloomington Washer Call
Care Electrolux Recommends for Its Washers
- Connect the washer with new fill hoses and rubber washers, swap flood-safe hoses for standard washer hoses, and hand-tighten plus about two-thirds of a turn without cross-threading. Source: Electrolux - Laundry Water Supply Guide
- Flush each faucet before hooking up the hoses so debris does not clog the inlet valve screens. Source: Electrolux - Laundry Water Supply Guide
Budgeting for a Electrolux Washer Repair
A Electrolux washer repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor replacement: $300–$500 Source: Fixr - How much does it cost to repair a washing machine?
- Door boot gasket (door seal) replacement: $230–$300 Source: Fixr - How much does it cost to repair a washing machine?
- Tub / drum bearing replacement: $150–$225 Source: Fixr - How much does it cost to repair a washing machine?
- Drain hose replacement: $95–$170 Source: Fixr - How much does it cost to repair a washing machine?
- After-hours / emergency visit surcharge: $100–$200 per visit Source: Fixr - How much does it cost to repair a washing machine?
Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?
Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, no spin, leaks, noise)
- Any error code shown on the display
- The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
Laundry Notes for Bloomington, IL
Most washer calls in Bloomington come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Questions to Ask a Bloomington Washer Technician
- Do you work on front-load and top-load washers, or only one type?
- If a part has to be ordered, how soon can you come back to finish?
- If the washer is leaking, will you find where the water starts before quoting a part?
Electrolux Washer Repair FAQs: Bloomington, IL
Why does my front-load washer smell?
Why does my Electrolux washer show an error code?
Which Bloomington technicians work on Electrolux?
Should I repair or replace my Electrolux washer?
More Washing Machine Repair in Bloomington, IL
More Electrolux Washer Repair Pages Nearby
Check the drain hose, the supply valves and (on a front loader) the drain pump filter, and note the model number before calling. It rules out the simple causes and speeds up a Electrolux repair.