Serving Oakville, Connecticut and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Oakville, CT

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Oakville.

Water sitting in the washer in Oakville?
One call connects you with a local technician who repairs front-load and top-load washers.
☎(866) 293-4411
✓12 companies listed for Oakville✓Independent, not a manufacturer✓Public ratings & distances

Most washing machine breakdowns trace back to a short list of parts: the drain pump and its filter, the lid switch or door lock, the drive belt or motor coupling, the inlet valve and the suspension. Below are the companies within reach of Oakville, sorted by how closely they match washing machine work, then by distance and public ratings.

Who Repairs Washers Near Oakville

40 repair companies serve Oakville from within 30 miles. The rest are spread across Meriden (8), Waterbury (6), and New Britain (4). Distances run up to about 18 miles. Sears Appliance Repair is the nearest, roughly 1.3 miles from Oakville. 4 of them mention washing machine or washer work in their listing or website. The 25 rated companies in range average 4.5 stars.

Washer & Dryer Repair
Sears Appliance Repair
595 Straits Turnpike, Watertown, CT 06795
1.3 mi from Oakville
★★★★½ 4.5 (153 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
470 Lewis Ave, Meriden, CT 06451
14.7 mi from Oakville
★★★★½ 4.6 (156 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
65 Holmes Rd, Newington, CT 06111
19.4 mi from Oakville
★★★★½ 4.5 (118 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Swift Southbury Appliance Repair.
555 Heritage Rd #211, Southbury, CT 06488
10.1 mi from Oakville
★★★★★ 4.9 (7 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1201 Boston Post Rd, Milford, CT 06460
24.8 mi from Oakville
★★★★½ 4.6 (192 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sub-Zero and Viking appliance repair
83 Wooster Hts Rd Ste 140, Danbury, CT 06810
24.9 mi from Oakville
★★★★½ 4.6 (55 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
7 Backus Ave, Danbury, CT 06810
25.2 mi from Oakville
★★★★½ 4.6 (215 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
3rd person appliance Repair
2389 Main St, Glastonbury, CT 06033
26.0 mi from Oakville
★★★★★ 5.0 (33 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1445 New Britain Ave, West Hartford, CT 06110
19.2 mi from Oakville
★★★★½ 4.5 (166 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
190A Frontage Rd, West Haven, CT 06516
23.1 mi from Oakville
★★★★½ 4.3 (274 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Econo Appliance Repair
487 Federal Rd, Brookfield, CT 06804
19.2 mi from Oakville
★★★★½ 4.4 (124 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ACE APPLIANCE SERVICE
15 W Main St, Plantsville, CT 06479
10.1 mi from Oakville
★★★★ 3.9 (45 reviews)
Mentions washersCommercial

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Washer repair near Oakville at a glance
Open on Saturdays (per listing)39
Rated 4.5 stars or higher (10+ reviews)14
Companies within 30 miles60
Mention a major washer brand0
Distance to the three closest (mi)1.3, 3.0, 3.2
Name washers or washing machines in their listing7

First up for Oakville: Sears Appliance Repair (1.3 miles away, based in Watertown, 4.5 stars from 153 reviews, lists Saturday hours); Sears Appliance Repair (14.7 miles away, based in Meriden, 4.6 stars from 156 reviews, lists Saturday hours); Sears Appliance Repair (19.4 miles away, based in Newington, 4.5 stars from 118 reviews, lists Saturday hours); Swift Southbury Appliance Repair. (10.1 miles away, based in Southbury, 4.9 stars from 7 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Washer fills slowly, will not fill, or keeps filling
  • Water left in the drum after the cycle
  • Water on the floor under or in front of the washer
  • Grinding or roaring noise that rises with spin speed

What Usually Goes Wrong

Lid switches and door locksA washer will not fill, agitate or spin unless the lid switch or door lock tells the control the lid or door is shut and locked. A worn switch or failed lock is one of the most common parts replaced.
Drain pumps and filtersSocks, coins, hair ties and lint end up in the drain path. On most front loaders a small filter behind a panel at the bottom front catches them, and a clogged filter or jammed pump is behind many not-draining calls.
Water inlet valveAn electric valve behind the washer lets hot and cold water in. When it sticks or its screens clog, the washer fills slowly, not at all, or keeps filling.

What a Washing Machine Technician Checks

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Drain hose and standpipeThe drain hose runs to a standpipe or laundry sink. A kinked hose, a clog in the standpipe or a hose pushed too far down the pipe can stop draining or siphon water out mid-fill.

Troubleshooting first? Start with front-load vs top-load washer problems or washer not spinning.

If Your Washer Is Leaking

Closing the washer's water faucets when the machine is not in use takes pressure off the hoses and valves and limits flooding if a hose gives way. Source: GE Appliances - Washer Owner's Manual

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Set the washer on a solid floor with no more than about 1 inch of slope under the cabinet, adjust the leveling feet, and tighten the locknuts against the cabinet; loose locknuts can cause vibration. Source: Whirlpool - Washer Installation Instructions

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

A washer repair is usually a single part plus labor. Reference ranges from published cost guides:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Local Notes for Oakville

Most washer calls in Oakville come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)

In Connecticut, you can check a license with the CT Department of Consumer Protection: Verify a License or report a problem to the Connecticut Department of Consumer Protection.

Questions to Ask a Oakville Washer Technician

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • What guarantee do you give on parts and labor?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Washing Machine Repair FAQs: Oakville, CT

Where is the water under my washer coming from?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.
Should I repair or replace my washer?
Compare the repair quote with the price of a comparable new washer and consider its age. Common repairs such as lid switches, door locks, inlet valves, belts and drain pumps are usually worth doing on a washer that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.

Brand-Specific Washer Repair, Oakville

Washing Machine Repair Near Oakville

Before you call a Oakville technician, check that the washer is plugged in, the hot and cold valves behind it are open and the drain hose is not kinked. If it is a front loader, clean the drain pump filter. If the problem stays, have the model number ready.

Skip the calling around: we will find a washer tech for you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech