Serving Bristol, Connecticut and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washing Machine Repair in Bristol, CT

Water left in the drum, a washer that will not spin or a puddle on the laundry room floor? Here are the companies that serve Bristol.

Washer down in Bristol?
Tell us the brand and the problem and we will connect you with a technician near Bristol.
☎(866) 293-4411
✓12 companies listed for Bristol✓Independent, not a manufacturer✓Public ratings & distances

Washers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention washers at the top.

Washer Technicians Serving Bristol, CT

40 repair companies serve Bristol from within 30 miles. 2 of them are based in Bristol itself, and other nearby bases include Meriden (7), Waterbury (6), and Hartford (5). Of those, 5 mention washing machine or washer work by name. Nearest on the list: SRT Bristol Appliance Repair, around 0.5 miles out. The 28 rated companies in range average 4.3 stars.

Washer & Dryer Repair
Sears Appliance Repair
65 Holmes Rd, Newington, CT 06111
10.3 mi from Bristol
★★★★½ 4.5 (118 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Appliance Repair UTSP LLC
20 Nanel Dr, Glastonbury, CT 06033
17.6 mi from Bristol
★★★★★ 5.0 (135 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
470 Lewis Ave, Meriden, CT 06451
11.3 mi from Bristol
★★★★½ 4.6 (156 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
295 Hartford Turnpike, Vernon, CT 06066
25.2 mi from Bristol
★★★★½ 4.6 (109 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
A Action Appliance Repair
379 E Center St, Manchester, CT 06040
23.4 mi from Bristol
★★★★★ 4.8 (1,608 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
595 Straits Turnpike, Watertown, CT 06795
11.0 mi from Bristol
★★★★½ 4.5 (153 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
3rd person appliance Repair
2389 Main St, Glastonbury, CT 06033
17.2 mi from Bristol
★★★★★ 5.0 (33 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
1445 New Britain Ave, West Hartford, CT 06110
9.9 mi from Bristol
★★★★½ 4.5 (166 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Swift Southbury Appliance Repair.
555 Heritage Rd #211, Southbury, CT 06488
19.8 mi from Bristol
★★★★★ 4.9 (7 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
ACE APPLIANCE SERVICE
15 W Main St, Plantsville, CT 06479
7.0 mi from Bristol
★★★★ 3.9 (45 reviews)
Mentions washersCommercial
Washer & Dryer Repair
Sears Appliance Repair
190A Frontage Rd, West Haven, CT 06516
28.5 mi from Bristol
★★★★½ 4.3 (274 reviews)
Mentions washersSaturday hours
Washer & Dryer Repair
Econo Appliance Repair
487 Federal Rd, Brookfield, CT 06804
28.7 mi from Bristol
★★★★½ 4.4 (124 reviews)
Mentions washersSaturday hours

Companies are shown by relevance and distance from Bristol. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Bristol
Rated 4.5 stars or higher (10+ reviews)14
Name washers or washing machines in their listing7
Appliance repair companies in range (30 mi)60
Mention a major washer brand0
Open on Saturdays (per listing)41
Distance to the three closest (mi)0.5, 2.4, 2.7

At the top of the Bristol list: Sears Appliance Repair (10.3 miles away, based in Newington, 4.5 stars from 118 reviews, lists Saturday hours); Appliance Repair UTSP LLC (17.6 miles away, based in Glastonbury, 5.0 stars from 135 reviews, lists Saturday hours); Sears Appliance Repair (11.3 miles away, based in Meriden, 4.6 stars from 156 reviews, lists Saturday hours); Sears Appliance Repair (25.2 miles away, based in Vernon, 4.6 stars from 109 reviews, lists Saturday hours).

⚡ Tell us what your washer is doing and we will connect you
☎(866) 293-4411

Washer Problems Worth a Service Call

  • Water left in the drum after the cycle
  • Loud banging, shaking or walking during the spin
  • Grinding or roaring noise that rises with spin speed
  • Washer fills slowly, will not fill, or keeps filling

What Usually Goes Wrong

Hoses, seals and the door bootFill hoses age and crack, drain hose clamps loosen, and the rubber door boot on a front loader can tear or trap water. Leaks usually start small under the washer before they show on the floor.
Belts, couplers and motorsDepending on the design, the motor turns the drum through a belt, a motor coupling or a direct-drive rotor. A worn belt, broken coupler or failed motor leaves the drum still while the washer hums or fills.
Suspension and bearingsShock absorbers, dampers and springs hold the tub steady during the spin. When they wear, the washer bangs and walks. Worn drum bearings make a rumbling or grinding noise that gets louder on the spin cycle.

How a Washer Service Call Usually Goes in Bristol

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.
Water level sensingA pressure switch or sensor tells the control how much water is in the tub. A blocked air tube or failed switch can cause overfilling, underfilling or a washer that will not move on to the next step.

Troubleshooting first? Start with washer not spinning or front-load vs top-load washer problems.

If Your Washer Is Leaking

Whirlpool recommends replacing washer fill hoses every five years to lower the risk of a hose failing and leaking. Source: Whirlpool - Washing Machine Fill Hoses

Plug the washer into a grounded three-prong outlet on a 15- or 20-amp 120-volt circuit, and never remove the ground prong or use an adapter or extension cord. Source: Whirlpool - Washer Installation Instructions

Avoid installing a washer on carpet or loose plywood, and keep leveling legs from extending more than half an inch below the cabinet. Source: Electrolux - Laundry Washers Noises Guide

More: where washer leaks come from.

Washing Machine Repair Cost Ranges

Before replacing a washer in Bristol, price the repair. Here is what published cost guides report for common jobs:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Laundry Notes for Bristol, CT

Most washer calls in Bristol come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Connecticut's Department of Consumer Protection does not list a separate appliance repair license; work on gas piping, approved gas appliances and refrigeration systems falls under its heating, piping and cooling license categories. Source: Heating Piping and Cooling License Types and Scope of Work (CT Department of Consumer Protection)

In Connecticut, you can check a license with the CT Department of Consumer Protection: Verify a License or report a problem to the Connecticut Department of Consumer Protection.

Before You Book in Bristol

  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • How often do you repair your brand washers, and how quickly can you get parts?
  • If a part has to be ordered, how soon can you come back to finish?

Washing Machine Repair FAQs: Bristol, CT

Why does my front-load washer smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why is my washer so loud on the spin cycle?
An unbalanced load is the most common cause, followed by a washer that is not level. If it keeps happening with balanced loads on a level floor, worn shock absorbers, suspension springs or drum bearings are the likely cause, and a technician should check them.
Why won't my washer drain?
The usual causes are a clogged drain pump filter (on most front loaders), a kinked or blocked drain hose, a sock or small item caught in the pump, or a failed drain pump. Clear the filter and check the hose first. If water still sits in the drum, a technician can test the pump.

Washer Repair by Brand in Bristol

More Washing Machine Repair Pages Nearby

A clear drain filter, open supply valves and the model number in hand make any washer repair in Bristol faster and cheaper.

One call to reach a local washing machine repair company
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech