Serving Plain City, Utah and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Washer & Dryer Repair in Plain City, UT

One technician for both laundry machines: independent repair companies near Plain City that work on washers and dryers.

Need washer or dryer repair near Plain City?
Tell us which machine is acting up and we will connect you with a local technician.
☎(866) 293-4411
✓12 companies listed for Plain City✓Independent, not a manufacturer✓Public ratings & distances

Laundry appliance repair covers two machines that fail in different ways: washers on water, drainage and spinning, dryers on heat, airflow and drum movement. The Plain City list below starts with companies whose listings mention washer or dryer work, followed by other appliance repair companies nearby.

Who Fixes Washers and Dryers Near Plain City

Within 30 miles of Plain City there are 21 appliance repair companies in our data. Other nearby bases include Ogden (3), Clearfield (3), and North Ogden (2). The farthest listed company is about 29 miles out. Nearest on the list: Ben Lomond Appliance Repair llc, around 5.9 miles out. 1 of them mentions washer or dryer work in their listing or website. Across 14 rated companies, the average public rating is 4.3 stars.

Washer & Dryer Repair
R.A.C.E.R. Service Appliance Repair
Main St S, Nibley, UT 84321
28.6 mi from Plain City
★★★★½ 4.7 (12 reviews)
Mentions washers
Appliance Repair
iFiX, LLC
5187 1500 W #1, Riverdale, UT 84405
10.2 mi from Plain City
★★★★★ 4.9 (436 reviews)
Appliance Repair
Ben Lomond Appliance Repair llc
190 E 3250 N, North Ogden, UT 84414
5.9 mi from Plain City
★★★★★ 5.0 (155 reviews)
Saturday hours
Appliance Repair
Ebenezer Appliance Repair
2850 Kiesel Ave, Ogden, UT 84401
8.8 mi from Plain City
★★★★½ 4.7 (25 reviews)
Appliance Repair
Dick Kearsley Service Center
520 State St, Clearfield, UT 84015
14.3 mi from Plain City
★★★★½ 4.6 (609 reviews)
Saturday hours
Appliance Repair
Precision Appliance Installs
314 N 650 E, Kaysville, UT 84037
20.3 mi from Plain City
★★★★★ 5.0 (38 reviews)
Appliance Repair
Eagle Appliance Repair
113 W 250 N, Clearfield, UT 84015
13.5 mi from Plain City
★★★★ 4.2 (69 reviews)
Appliance Repair
Appliance Clinic Inc
37 W 250 N, Clearfield, UT 84015
13.5 mi from Plain City
★★★★½ 4.5 (43 reviews)
Appliance Repair
Integrity Appliance Repair
2637 N Washington Blvd #282, North Ogden, UT 84414
6.0 mi from Plain City
★★★★ 3.8 (13 reviews)
Appliance Repair
Murphy's Appliance Sales & Services
38 S Main St, Brigham City, UT 84302
14.5 mi from Plain City
★★★★½ 4.5 (60 reviews)
Saturday hours
Appliance Repair
United Appliance Service
1866 N 2000 W, Clinton, UT 84015
11.5 mi from Plain City
Saturday hours
Appliance Repair
All Day Appliance Service
1651 N 700 W, Layton, UT 84041
16.4 mi from Plain City
Saturday hours

Companies are shown by relevance and distance from Plain City. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

By the numbers: technicians near Plain City
Mention a major washer brand0
Rated 4.5 stars or higher (10+ reviews)8
Listing Saturday hours12
Listed as washer & dryer repair1
Mention washer work1
Companies within 30 miles21
Three nearest companies, miles away5.9, 6.0, 8.5

The leading options for Plain City are R.A.C.E.R. Service Appliance Repair (28.6 miles away, based in Nibley, 4.7 stars from 12 reviews); iFiX, LLC (10.2 miles away, based in Riverdale, 4.9 stars from 436 reviews); Ben Lomond Appliance Repair llc (5.9 miles away, based in North Ogden, 5.0 stars from 155 reviews, lists Saturday hours); Ebenezer Appliance Repair (8.8 miles away, based in Ogden, 4.7 stars from 25 reviews).

⚡ One call for both laundry machines
☎(866) 293-4411

Washer Problems Worth a Call

  • Water left in the drum after the cycle
  • Loud banging, shaking or walking during the spin
  • Grinding or roaring noise that rises with spin speed

Dryer Problems Worth a Call

  • Dryer shuts off early or gets very hot on the outside
  • Thumping, squealing or scraping while tumbling
  • Dryer runs but clothes stay damp or cold

The Washer Side of the Call

Suspension and shocksShock absorbers, dampers or suspension rods keep the tub from slamming during the spin. Worn parts cause banging, off-balance shutdowns and a washer that walks across the floor.
Lid switch or door lockTop loaders use a lid switch or lid lock and front loaders use a door lock. If the control cannot confirm the lid or door is shut and locked, the washer will not fill, agitate or spin, and a technician tests the switch and its wiring.

What a Technician Checks on the Dryer

Heat on electric dryersElectric dryers heat with an element, guarded by a thermal fuse and thermostats. A dryer that tumbles but stays cold usually has one of those parts open.
Drum rollers, belt and idlerThumping, squealing or a drum that will not turn comes from worn rollers, a broken belt or a tired idler pulley.

Lint, Vents and Fire Safety

Clean the vent pipe roughly once a year, or sooner if loads start taking longer to dry; a lint removal service can do this. Source: NFPA (via U.S. Department of Energy) - Clothes Dryer & Washing Machine Safety

The outside termination should have a backdraft damper and no screen (screens trap lint), and the flap must open when the dryer runs and be kept clear of snow. Source: U.S. DOE Building America Solution Center (PNNL) - Proper Clothes Dryer Venting

Washer troubleshooting: washer not spinning or washer leaking from the bottom.

Budgeting for Laundry Appliance Repair

Price the repair before replacing either machine in Plain City. Published ranges for common washer and dryer jobs:

Replacement tends to make more financial sense once a repair runs past half the cost of buying and installing a new washer. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

Around Plain City

Most washer calls in Plain City come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Hiring a Washer Repair Company in Plain City

  • What guarantee do you give on parts and labor?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?
  • Is your company licensed where my state requires it, and insured?

Washer & Dryer Repair FAQs: Plain City, UT

If one machine fails, should I replace both?
Not necessarily. Repairing the failed machine is often worth it if the other is still working well. Compare the repair quote with the price of a comparable new machine and consider the age of both.
What stops a washer from spinning?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Can you repair a stacked laundry unit?
Stacked units and laundry centers can take more time because the machines have to be separated or pulled out of a closet. Mention a stacked setup when you call so the company plans for it.

Other Washer Repair in Plain City

Washer & Dryer Repair in Nearby Cities

If the dryer is slow, clean the lint screen and check that the vent hood outside opens when the dryer runs. If the washer will not drain, clean its pump filter. Then call with the model numbers ready.

Get connected with a washer and dryer technician near Plain City
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech