Serving Gillette, Wyoming and nearby areas Helpline · (866) 293-4411
☎(866) 293-4411Call

Speed Queen Washer Repair in Gillette, WY

A local list of independent Speed Queen washing machine technicians for Gillette and the Campbell County area, plus a helpline that connects you with one.

Talk to a Speed Queen washer tech in Gillette
Tell us the model and the problem and we will connect you with a local technician.
☎(866) 293-4411
✓6 companies listed for Gillette✓Independent, not a manufacturer✓Public ratings & distances

A Speed Queen washer shares most of its basic parts with other washers, but its drive design, lid or door lock, controls and error codes are specific to the brand. Below are independent repair companies serving Gillette, with those that mention Speed Queen first, then the nearest appliance repair companies.

Washing Machine Repair Near Me is independent and not affiliated with Speed Queen. Listed companies are independent technicians who repair Speed Queen washers and other brands.

Independent Speed Queen Washer Technicians, Gillette WY

We found 7 appliance repair companies within 83 miles of Gillette. 2 list an address in Gillette, and other nearby bases include Sheridan (3) and Spearfish (2). No company within 90 miles of Gillette mentions Speed Queen by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Shield Appliance is the nearest, roughly 1.2 miles from Gillette. The 4 rated companies in range average 4.5 stars. Gillette is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Shield Appliance
816 E 3rd St, Gillette, WY 82716
1.2 mi from Gillette
★★★★½ 4.5 (25 reviews)
Appliance Repair
Appliance Repair Company
302 Wild Prairie Rd, Gillette, WY 82718
21.9 mi from Gillette
★★★★ 4.2 (53 reviews)
Washer & Dryer Repair
Sears Appliance Repair
137 E Illinois St, Spearfish, SD 57783
82.4 mi from Gillette
Mentions washersSaturday hours
Washer & Dryer Repair
Sears Appliance Repair
2571 N Main St, Sheridan, WY 82801
81.4 mi from Gillette
Mentions washersSaturday hours
Appliance Repair
A Plus Plumbers & Appliance Repair, LLC
1150 Broadway St, Sheridan, WY 82801
80.6 mi from Gillette
★★★★½ 4.4 (53 reviews)
Washer & Dryer Repair
Sears Appliance Repair
1467 Coffeen Ave, Sheridan, WY 82801
79.3 mi from Gillette
Mentions washersSaturday hours

Companies are shown by relevance and distance from Gillette. A mention does not mean manufacturer certification, so ask each company about its experience with your washer.

Gillette repair companies in numbers
Mention washer work3
Listing Saturday hours3
Rated 4.5 stars or higher (10+ reviews)2
Mention Speed Queen0
Appliance repair companies in range (83 mi)7
Three nearest companies, miles away1.2, 21.9, 79.3

First up for Gillette: Shield Appliance (1.2 miles away, 4.5 stars from 25 reviews); Appliance Repair Company (21.9 miles away, 4.2 stars from 53 reviews); Sears Appliance Repair (82.4 miles away, based in Spearfish, lists Saturday hours); Sears Appliance Repair (81.4 miles away, based in Sheridan, lists Saturday hours).

⚡ Get connected with a Speed Queen washer technician near Gillette
☎(866) 293-4411

Speed Queen sells top-load agitator, front-load, stacked, and commercial washers in the U.S., and the repair path differs by type: front loaders add a door lock, door boot and pump filter, while top loaders rely on a lid switch and either an agitator or an impeller.

Speed Queen Washer Lines Technicians Work On

SF7Stacked washer-dryer for laundry spaces with limited floor room.
FF7Front-load washer built for quiet running, fast cycles and efficient washing.

What Makes Speed Queen Washer Repairs Different

The TC5 has no lid lock, which sets it apart in the Speed Queen top-load lineup. Source: Speed Queen - Consumer Product Catalog

Speed Queen Washer Symptoms and First Checks

Signs Your Speed Queen Washer Needs a Technician

  • Loud banging, shaking or walking during the spin
  • Washer fills slowly, will not fill, or keeps filling
  • An error code on the display

What a Washing Machine Technician Checks

Tub bearings and sealA rumble or roar that gets louder as the drum speeds up usually means worn bearings, often after a tub seal has let water reach them. It is one of the bigger repairs, so the technician will compare it with the washer's age and value.
Drain pump and filterIf water stays in the drum, the technician checks the drain path first. Most front loaders have a pump filter behind a small panel at the bottom front, and many top loaders hide a pump that can jam on a sock or coin. The pump is then tested for power and blockage.

Care Speed Queen Recommends for Its Washers

Budgeting for a Speed Queen Washer Repair

Most Speed Queen washer repairs involve common parts and an hour or two of labor. For reference, published cost guides report:

For a drum repair, consider replacing the washer instead if it is more than five years old or has had frequent problems. Source: HomeAdvisor - How Much Do Washing Machine Repairs Cost?

Ranges are published estimates, not quotes. See the washing machine repair cost guide and whether to repair or replace a washer.

What to Have Ready for a Speed Queen Washer Call

  • The brand, model and serial number from the label inside the lid, around the door opening or on the back of the cabinet
  • How old the washer is
  • Where the washer drains (standpipe or laundry sink)

Around Gillette

Most washer calls in Gillette come down to the same handful of parts: the drain pump and filter, the lid switch or door lock, the drive belt or coupler, the inlet valve and the suspension.

The Wyoming State Fire Marshal licenses electricians, electrical contractors and limited technicians (including an HVAC category), and its licensing page lists no appliance repair license. Source: Wyoming State Fire Marshal: Electrical Licensing

In Wyoming, you can check a license with the Wyoming State Fire Marshal Public Portal (electrical licensing) or report a problem to the Wyoming Attorney General, Consumer Protection and Antitrust Unit.

Hiring a Washer Repair Company in Gillette

  • Do you work on front-load and top-load washers, or only one type?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the problem turns out to be the supply valves or the standpipe, do you handle that or should I call a plumber?

Speed Queen Washer Repair FAQs: Gillette, WY

How do I get rid of a washer mildew smell?
Residue from detergent and fabric softener collects in the door boot, the dispenser and the drum. Wipe the boot, clean the dispenser, run the washer's cleaning cycle or a hot empty cycle, and leave the door open between loads.
Why won't my washer spin?
An unbalanced load, water that will not drain, or a lid switch or door lock that is not engaging stops most spin cycles. If those check out, a technician looks at the drive belt, motor coupling, motor and control.
Do you work for Speed Queen?
No. We are an independent directory and are not affiliated with Speed Queen. The companies listed are independent technicians. For manufacturer coverage questions, contact Speed Queen directly.
Why is my washer leaking?
Common sources are a loose or cracked fill hose, the drain hose connection, a torn door boot on a front loader, too much detergent causing suds overflow, or a leaking pump or tub seal. Unplug the washer and shut both valves, then look where the water starts.

More Washing Machine Repair in Gillette, WY

More Speed Queen Washer Repair Pages Nearby

Before you call, find the model and serial number on your Speed Queen washer's label, usually inside the lid, around the door opening or on the back of the cabinet. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Speed Queen washer technician near you
☎(866) 293-4411
☎ Call (866) 293-4411 Talk to a tech